These Anest Iwata ISP-50 dry scroll vacuum pumps operate on single phase, 115 VAC, 50/60 Hz., displacement for this Anest Iwata ISP-50 is 2.1 CFM at 60 Hz., and 1.1x10 Torr ultimate pressure. The Anest Iwata ISP-50 are economical and inexpensive to operate, offers high performance, compact design and very light vacuum pump with 27 lbs. Little routine maintenance, no oil changes, filters or foreline traps to replace. These Anest Iwata ISP-50 oil-free dry scroll vacuum pumps are an excellent alternative to oil sealed rotary vane pumps. These Anest Iwata ISP-50 oil-free dry scroll pumps operate on 1-phase, 115 VAC. The operating Instructions manual is available for down in PDF format below.

The Anest Iwata ISP-50 dry scroll vacuum pump is economical and inexpensive to operate. Offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace. These Anest Iwata ISP-50 oil-free dry scroll vacuum pumps are an excellent alternative to oil sealed rotary vane pumps. These Anest Iwata ISP-50 oil-free dry scroll pumps operate on single phase, 200-230 VAC, 50/60 Hz. Displacement for this ISP-50 is 2.12 CFM at 60 Hz. The operating Instructions manual is available for down in PDF format below. APPLICATIONSSputtering equipment, Vacuum deposition equipment, Ion plating equipmentAccelerator, Synchrotron Radiation

The Anest Iwata ISP-90 dry scroll vacuum pump is economical and inexpensive to operate. Offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace. These Anest Iwata ISP-90 oil-free dry scroll vacuum pumps are an excellent alternative to oil sealed rotary vane pumps. These Anest Iwata ISP-90 oil-free dry scroll pumps operate on 1-phase, 100-115 or 200-230 VAC, 50/60 Hz, set to 115 VAC. Displacement for this ISP-90 is 3.8 CFM at 60 Hz. The operating Instructions manual is available for download in PDF format below. APPLICATIONSSputtering equipment, Vacuum deposition equipment, Ion plating equipment

These Anest Iwata ISP-250E oil-free dry scroll pumps operate on 1-phase, 100-115 or 200-230 VAC, 50/60 Hz, set to 115 VAC. Displacement for this Anest Iwata ISP-250E is 10.6 CFM at 60 Hz. The Anest Iwata ISP-250E is economical and inexpensive to operate, offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace. Excellent alternative to oil sealed rotary vane pumps. The part number ISP-250E-SV specifies Single-Phase (S) with vertical oriented intake flange (V). The operating instructions manual is available for down in PDF format below. APPLICATIONSSputtering equipment, Vacuum deposition equipment, Ion plating equipment

These Anest Iwata ISP-250E oil-free dry scroll pumps operate on three phase, 110/115 VAC, 50/60 Hz. Displacement for this Anest Iwata ISP-250E is 10.6 CFM at 60 Hz. The Anest Iwata ISP-250E is economical and inexpensive to operate, offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace. Excellent alternative to oil sealed rotary vane pumps. The part number ISP-250E-SV specifies Single-Phase (S) with vertical oriented intake flange (V). The operating instructions manual is available for down in PDF format below. APPLICATIONSSputtering equipment, Vacuum deposition equipment, Ion plating equipment

These Anest Iwata ISP-250E oil-free dry scroll pumps operate on three phase, 200-230/380-480 VAC, set to 230 VAC. Displacement for this Anest Iwata ISP-250E is 10.6 CFM at 60 Hz. The Anest Iwata ISP-250E is economical and inexpensive to operate, offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace. Excellent alternative to oil sealed rotary vane pumps. The part number ISP-250E-TV specifies Three-Phase (T) with vertical oriented intake flange (V). The operating instructions manual is available for down in PDF format below. APPLICATIONSSputtering equipment, Vacuum deposition equipment, Ion plating equipment

These Anest Iwata ISP-250E oil-free dry scroll pumps operate on single phase, 200/230 VAC, 50/60 Hz. Displacement for this Anest Iwata ISP-250E is 10.6 CFM at 60 Hz. The Anest Iwata ISP-250E is economical and inexpensive to operate, offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace. Excellent alternative to oil sealed rotary vane pumps. The part number ISP-250E-SV specifies Single-Phase (S) with vertical oriented intake flange (V). The operating instructions manual is available for down in PDF format below. APPLICATIONSSputtering equipment, Vacuum deposition equipment, Ion plating equipment

These Anest Iwata ISP-250E oil-free dry scroll pumps with explosion proof motor operate on single phase, 100-115 or 200-230 VAC, 50/60 Hz, set to 115 VAC. Displacement for this Anest Iwata ISP-250E-SV-EX is 10.6 CFM at 60 Hz., and 1x10 Torr ultimate pressure. The Anest Iwata ISP-250E-SV-EX is economical and inexpensive to operate, offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace. Excellent alternative to oil sealed rotary vane pumps. The part number ISP-250E-SV specifies Single-Phase (S) with vertical oriented intake flange (V). The operating instructions manual is available for down in PDF format below.

These Anest Iwata ISP-250E oil-free dry scroll pumps explosion proof motor operate on three phase, 200-230/380-480 VAC, set to 230 VAC. Displacement for this Anest Iwata ISP-250E-TV-EX is 10.6 CFM at 60 Hz., and 1x10 Torr ultimate pressure. The Anest Iwata ISP-250E-TV-EX is economical and inexpensive to operate, offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace. Excellent alternative to oil sealed rotary vane pumps. The part number ISP-250E-TV specifies Three-Phase (T) with vertical oriented intake flange (V). The operating instructions manual is available for down in PDF format below.

These Anest Iwata ISP-250C oil-free dry scroll pumps operate on 1-phase, 100-115 or 200-230 VAC, 50/60 Hz, factory set to 200-230 VAC. Displacement for this Anest Iwata ISP-250C is 10.6 CFM at 60 Hz. The Anest Iwata ISP-250C is economical and inexpensive to operate, offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace. Excellent alternative to oil sealed rotary vane pumps. The part number ISP-250C-SV specifiies Single-Phase (S) with vertical oriented intake flange (V). The operating instructions manual is available for down in PDF format below. APPLICATIONSSputtering equipment, Vacuum deposition equipment, Ion plating equipment

This Anest Iwata OEM complete pump module for the ISP-90 dry scroll vacuum pump is an excellent alternative to sending your pump in for rebuild service.The new module is easy to install and requires only simple tools. This new module is complete with the outboard, orbiting and inboard scroll plates. A new module will turn your old pump into a new pump at a fraction of the new cost. Pump modules are new with factory 1 year warranty. Anest Iwata ISP-90 oil-free dry scroll pumps have a pumping speed of 3.8 CFM at 60hz and reach an ultimate vacuum of 3.8x10 Torr. The Anest Iwata ISP-90 is economical and inexpensive to operate, offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace make the Anest Iwata an excellent alternative to oil sealed rotary vane pumps.

This Anest Iwata OEM complete pump module for the DVSL-501E dry scroll vacuum pump is an excellent alternative to sending your pump in for rebuild service.The new module is easy to install and requires only simple tools. This new module is complete with the outboard, orbiting and inboard scroll plates. A new module will turn your old pump into a new pump at a fraction of the new cost. Pump modules are new with factory 1 year warranty. Anest Iwata DVSL-501E oil-free dry scroll pumps have a pumping speed of 18.4 CFM at 60hz and reach an ultimate vacuum of 7.5x10 Torr. The Anest Iwata DVSL-501E is economical and inexpensive to operate, offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace make the Anest Iwata an excellent alternative to oil sealed rotary vane pumps.

This Anest Iwata OEM complete pump module for the ISP-205C dry scroll vacuum pump is an excellent alternative to sending your pump in for rebuild service.The new module is easy to install and requires only simple tools. This new module is complete with the outboard, orbiting and inboard scroll plates. A new module will turn your old pump into a new pump at a fraction of the new cost. Pump modules are new with factory 1 year warranty. Anest Iwata ISP-250C oil-free dry scroll pumps have a pumping speed of 10.6 CFM (18 m/hr.) at 60hz and reach an ultimate vacuum of 1x10 Torr. The Anest Iwata ISP-250C is economical and inexpensive to operate, offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace make the Anest Iwata an excellent alternative to oil sealed rotary vane pumps.

The Anest Iwata ISP-250C is economical and inexpensive to operate. Offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace. Excellent alternative to oil sealed rotary vane pumps. These Anest Iwata ISP-250C oil-free dry scroll pumps, operate on 3-phase, 200-230/380-480 VAC, & 50/60 Hz, being set to 480 VAC. Displacement for this Anest Iwata ISP-250C is 10.6 CFM at 60 Hz. This is pump has a 3-Phase motor. The part number ISP-250C-TV specifiies Three-Phase (T) with vertical oriented intake flange (V). The operating instructions manual is available for down in PDF format below.

This Anest Iwata OEM complete pump module for the DVSL-501E-HC dry scroll vacuum pump is an excellent alternative to sending your pump in for rebuild service.The new module is easy to install and requires only simple tools. This new module is complete with the outboard, orbiting and inboard scroll plates. A new module will turn your old pump into a new pump at a fraction of the new cost. Pump modules are new with factory 1 year warranty. Anest Iwata DVSL-501E-HC oil-free dry scroll pumps have a pumping speed of 18.4 CFM at 60hz and reach an ultimate vacuum of 7.5x10 Torr. The Anest Iwata DVSL-501E-HC is economical and inexpensive to operate, offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace make the Anest Iwata an excellent alternative to oil sealed rotary vane pumps.

This Anest Iwata OEM complete pump module for the DVSL-500E dry scroll vacuum pump is an excellent alternative to sending your pump in for rebuild service.The new module is easy to install and requires only simple tools. This new module is complete with the outboard, orbiting and inboard scroll plates. A new module will turn your old pump into a new pump at a fraction of the new cost. Pump modules are new with factory 1 year warranty. Anest Iwata DVSL-500 oil-free dry scroll pumps have a pumping speed of 18.4 CFM at 60hz and reach an ultimate vacuum of 2.3x10 Torr. The Anest Iwata DVSL-500E is economical and inexpensive to operate, offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace make the Anest Iwata an excellent alternative to oil sealed rotary vane pumps.

This Anest Iwata OEM complete pump module for the ISP-500C dry scroll vacuum pump is an excellent alternative to sending your pump in for rebuild service.The new module is easy to install and requires only simple tools. This new module is complete with the outboard, orbiting and inboard scroll plates. A new module will turn your old pump into a new pump at a fraction of the new cost. Pump modules are new with factory 1 year warranty. Anest Iwata ISP-500C oil-free dry scroll pumps have a pumping speed of 21.2 CFM at 60hz and reach an ultimate vacuum of 7.5x10 Torr. The Anest Iwata ISP-500C is economical and inexpensive to operate, offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace make the Anest Iwata an excellent alternative to oil sealed rotary vane pumps.

This Anest Iwata OEM complete pump module for the ISP-205E dry scroll vacuum pump is an excellent alternative to sending your pump in for rebuild service.The new module is easy to install and requires only simple tools. This new module is complete with the outboard, orbiting and inboard scroll plates. A new module will turn your old pump into a new pump at a fraction of the new cost. Pump modules are new with factory 1 year warranty. Anest Iwata ISP-250E oil-free dry scroll pumps have a pumping speed of 10.6 CFM (18 m/hr.) at 60hz and reach an ultimate vacuum of 1x10 Torr. The Anest Iwata ISP-250E is economical and inexpensive to operate, offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace make the Anest Iwata an excellent alternative to oil sealed rotary vane pumps.

This Anest Iwata OEM complete pump module for the ISP-1000 dry scroll vacuum pump is an excellent alternative to sending your pump in for rebuild service.The new module is easy to install and requires only simple tools. This new module is complete with the outboard, orbiting and inboard scroll plates. A new module will turn your old pump into a new pump at a fraction of the new cost. Pump modules are new with factory 1 year warranty. Anest Iwata ISP-1000 oil-free dry scroll pumps have a pumping speed of 10.6 CFM (18 m/hr.) at 60hz and reach an ultimate vacuum of 1x10 Torr. The Anest Iwata ISP-1000 is economical and inexpensive to operate, offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace make the Anest Iwata an excellent alternative to oil sealed rotary vane pumps.

The Anest Iwata ISP-500C is economical and inexpensive to operate. Offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace. Excellent alternative to oil sealed rotary vane pumps. These Anest Iwata ISP-500C oil-free dry scroll pumps operate on a single phase, 100-115 VAC, 50/60 Hz. Displacement for this Anest Iwata ISP-500C is 21.2 CFM at 60hz. This pump has a 1-Phase motor. The part number ISP-500C-SV-D1 specifiies Single-Phase (S) with vertical oriented intake flange (V). The operating instructions manual is available for down in PDF format below. APPLICATIONSSputtering equipment, Vacuum deposition equipment, Ion plating equipment

The Anest Iwata ISP-500C oil-free dry scroll pumps with explosion proof motor is economical and inexpensive to operate. Offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace. Excellent alternative to oil sealed rotary vane pumps. These Anest Iwata ISP-500C-SV-EX oil-free dry scroll pumps operate on a single phase, 100/230 VAC, Set to 115 VAC, 50/60 Hz. Displacement for this Anest Iwata ISP-500C is 21.2 CFM at 60hz., and 7.5x10 Torr ultimate pressure. This pump has a 1-Phase motor. The part number ISP-500C-SV specifies Single-Phase (S) with vertical oriented intake flange (V). The operating instructions manual is available for down in PDF format below.

The Anest Iwata ISP-500C is economical and inexpensive to operate. Offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace. Excellent alternative to oil sealed rotary vane pumps. These Anest Iwata ISP-500C oil-free dry scroll pumps operate on a three phase 200-230/380-480 VAC, 50/60 Hz. Displacement for this Anest Iwata ISP-500C-TH is 21.2 CFM at 60hz. This pump has a Three-Phase motor. The part number ISP-500C-TH specifies Three-Phase (T) with horizontal oriented intake flange (H). The operating instructions manual is available for down in PDF format below. APPLICATIONSSputtering equipment, Vacuum deposition equipment, Ion plating equipment

Torr, Single Phase 100-115/200-230 VAC. The Anest Iwata DVSL-100C-B oil-free dry scroll pumps operate on a single phase 100-115/200-230 VAC, 50/60 Hz. Displacement for this Anest Iwata DVSL-100C-B is 4.2 CFM at 60hz, ultimate pressure 3.8x10 Torr. This pump offers high performance, compact design and very light, is economical and inexpensive to operate. Little routine maintenance, no oil changes, filters or foreline traps to replace. Excellent alternative to oil sealed rotary vane pumps. This pump has a single-phase motor. The operating instructions manual is available for down in PDF format below. Pumping of humid gas by vacuum pump can cause condensed moisture to remain in pump. This remaining moisture can cause failure to ultimate pressure or pump. Air Flush operation is necessary to pump remaining moisture inside the pump. Air Flush operation dose not only pump remaining moisture but also recovers ultimate pressure.

The Anest Iwata ISP-500C oil-free dry scroll pumps with explosion proof motor is economical and inexpensive to operate. Offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace. Excellent alternative to oil sealed rotary vane pumps. These Anest Iwata ISP-500C-TV-EX oil-free dry scroll pumps operate on a three phase 200-230/380-480 VAC, 50/60 Hz. Displacement for this Anest Iwata ISP-500C is 21.2 CFM at 60hz., and 7.5x10 Torr ultimate pressure. This pump has a three-phase motor. The part number ISP-500C-TV specifies Three-Phase (T) with vertical oriented intake flange (V). The operating instructions manual is available for down in PDF format below.

Torr, Three Phase Motor, 200-230/380-460 VAC. The Anest Iwata DVSL-500 oil-free dry scroll pumps operate on a three phase motor 200-230/380-460 VAC, 50/60 Hz. Displacement for this Anest Iwata DVSL-500 is 18.4 CFM at 60hz, ultimate pressure 2.3x10 Torr. This pump offers high performance, compact design and very light, is economical and inexpensive to operate. Little routine maintenance, no oil changes, filters or foreline traps to replace. Excellent alternative to oil sealed rotary vane pumps. This pump has a single-phase motor. The operating instructions manual is available for down in PDF format below. APPLICATIONSSputtering equipment, Vacuum deposition equipment, Ion plating equipment

The Anest Iwata ISP-500C is economical and inexpensive to operate. Offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace. Excellent alternative to oil sealed rotary vane pumps. These Anest Iwata ISP-500C oil-free dry scroll pumps operate on a single phase, 100-115 or 200-230 VAC, 50/60 Hz, set to 200-230 VAC. Displacement for this Anest Iwata ISP-500C is 21.2 CFM at 60hz. This pump has a 1-Phase motor. The part number ISP-500C-SV specifies Single-Phase (S) with vertical oriented intake flange (V). The operating instructions manual is available for down in PDF format below. APPLICATIONS

The Anest Iwata ISP-500C is economical and inexpensive to operate. Offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace. Excellent alternative to oil sealed rotary vane pumps. These Anest Iwata ISP-500C oil-free dry scroll pumps operate on a single phase, 200-230 VAC, 50/60 Hz. Displacement for this Anest Iwata ISP-500C is 21.2 CFM at 60hz. This pump has a 1-Phase motor. The part number ISP-500C-SV-D2 specifiies Single-Phase (S) with vertical oriented intake flange (V). The operating instructions manual is available for down in PDF format below. APPLICATIONSSputtering equipment, Vacuum deposition equipment, Ion plating equipment

Torr, Three Phase Motor, 200-230/380-460 VAC. The Anest Iwata DVSL-501E oil-free dry scroll pumps operate on a three phase motor 200-230/380-460 VAC, 50/60 Hz. Displacement for this Anest Iwata DVSL-501E is 18.4 CFM at 60hz, ultimate pressure 7.5x10 Torr. This pump offers high performance, compact design and very light, is economical and inexpensive to operate. Little routine maintenance, no oil changes, filters or foreline traps to replace. Excellent alternative to oil sealed rotary vane pumps. This pump has a three-phase motor. The operating instructions manual is available for down in PDF format below. APPLICATIONSSputtering equipment, Vacuum deposition equipment, Ion plating equipment

Torr, Three Phase Motor, 200-230/380-460 VAC. The Anest Iwata DVSL-501E-HC oil-free dry scroll pumps operate on a three phase motor 200-230/380-460 VAC, 50/60 Hz. Displacement for this Anest Iwata DVSL-501E-HC is 18.4 CFM at 60hz, ultimate pressure 7.5x10 Torr. This pump offers high performance, compact design and very light, is economical and inexpensive to operate. Little routine maintenance, no oil changes, filters or foreline traps to replace. Excellent alternative to oil sealed rotary vane pumps. This pump has a three-phase motor. The operating instructions manual is available for down in PDF format below. APPLICATIONSSputtering equipment, Vacuum deposition equipment, Ion plating equipment

The Anest Iwata ISP-1000 is economical and inexpensive to operate. Offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace. Excellent alternative to oil sealed rotary vane pumps. These Anest Iwata ISP-1000-TH oil-free dry scroll pumps operate on 3-phase, 208-230 or 380-480 VAC, & 50/60 Hz. Displacement for this Anest Iwata ISP-1000-TH is 42.4 CFM at 60 Hz. This pump has a 3-Phase motor. The part number ISP-1000E-TH specifiies Three-Phase (T) with Horizontal oriented intake flange (H). The operating instructions manual is available for down in PDF format below. Anest Iwata ISP-1000-TH oil-free dry scroll pumps have a pumping speed of 42.4 CFM at 60hz and reach an ultimate vacuum of 7.5x10