Accepts any and up to 6 of the FOUR gauge cards:(Controller Dual Analog Input Card)(ConvecTorr Convection Gauges/Thermocouple Gauge Card)(Hot-Filament Ion Gauges (HFIG) Card)(Inverted-Magnetron (IMG) Cold-Cathode or Penning Gauge Card) The XGS-600 Vacuum Gauge Controller provides unprecedented capacity, performance and flexibility in a cost effective, standard half-rack package. A programmable dot matrix LCD provides display flexibility, and simple screen organization and navigation makes the unit extremely easy to use. Drop down gauge selection automatically sets the emission current, sensitivity and overpressure. The screen displays up to eight gauges and pressures simultaneously, and permits the user to label each gauge. 8 set points, fully programmable RS232/RS485 serial communications and universal voltage compatibility are standard on all units. A large-font feature provides visibility from up to 20 feet.

Accepts any and up to 6 of the FOUR gauge cards:(Controller Dual Analog Input Card)(ConvecTorr Convection Gauges/Thermocouple Gauge Card)(Hot-Filament Ion Gauges (HFIG) Card)(Inverted-Magnetron (IMG) Cold-Cathode or Penning Gauge Card) The XGS-600 Vacuum Gauge Controller provides unprecedented capacity, performance and flexibility in a cost effective, standard half-rack package. A programmable dot matrix LCD provides display flexibility, and simple screen organization and navigation makes the unit extremely easy to use. Drop down gauge selection automatically sets the emission current, sensitivity and overpressure. The screen displays up to eight gauges and pressures simultaneously, and permits the user to label each gauge. 8 set points, fully programmable RS232/RS485 serial communications and universal voltage compatibility are standard on all units. A large-font feature provides visibility from up to 20 feet.

Agilent Part Number: XGS600H1M0C0. The XGS-600 Vacuum Gauge Controller provides unprecedented capacity, performance and flexibility in a cost effective, standard half-rack package. A programmable dot matrix LCD provides display flexibility, and simple screen organization and navigation makes the unit extremely easy to use. Drop down gauge selection automatically sets the emission current, sensitivity and overpressure. The screen displays up to eight gauges and pressures simultaneously, and permits the user to label each gauge. 8 set points, fully programmable RS232/RS485 serial communications and universal voltage compatibility are standard on all units. A large-font feature provides visibility from up to 20 feet.

This is a Dual Analog Input Card for the XGS-600 Multi-Gauge Controller. Depending on the XGS-600 Controller configuration it may or may not have this Dual Analog Input Card. With 1 Analog Input Card the XGS-600 Controller can read 2 active gauges (2 active gauges per card). Up to 6 Dual Analog Input Cards can be installed in the XGS-600 Controller, for a total of 12 active gauge inputs. Other cards can also be used along side this Dual Analog Input Card. Agilent Varian Part Number R3487301.Compatible with the following Varian Agilent active gauges:CT-100, PVG-500, Rough Vacuum Atm to 10-3CDG-500, PCG-750, High Vacuum 10-3 to 10-9FRG-700, FRG-720/730, High Vacuum 10-3 to 10-9

This is the Dual Convection Gauge Card for the XGS-600 Mulit-Gauge Vacuum Controller. The Convection card operates 2 thermocouple or 2 convection gauges and allows you to calibrate to the actual atmospheric pressure value, to vacuum pressure and select calibration of air or argon. Each channel has its own 9 pin Dsub connector. Other cards can also be used along side this Dual Convection Card.Compatible with the following gauges in the rough vacuum range from atmosphere to 10-3:ConvecTorrAlso compatible with competitors gauges (see XGS-600 Instruction/Users Manual .pdf page 2-4 for Cross Reference below.) This is the Dual Convection Thermocouple Gauge Card ONLY. For Complete Board Specifications/Descriptions see XGS-600 Instruction/Users Manual .pdf page A-3 below. The XGS-600 Controller, other cards, gauges and cables sold separately on this website.

This is the Hot Filament Ion Gauge HFIG board and operates all Varian hot filament gauges and most other available Bayard-Alpert type hot filament ionization gauges including nude UHV types. The board can be set up for all Varian hot filament gauges and allows you to set gauge emission current, sensitivity value, and gas correction factor. The UHV range and E-Beam degas are standard, as is dual filament control, remote I/O control of emission and filament selection, and 0 to 10 V analog output. Other cards can also be used along side this Dual Convection Card.Compatible with the following gauges in the high to ultra high vacuum range from 10-3 to 10-10:

This is the Agilent Varian (IMG) Inverted Magnetron Board and operates the Ultra High Vacuum IMG-100 and IMG-300 gagues. It allows you to set the gauge sensitivity value, and gas correction factor. The (UHV) Ultra High Vacuum range is standard, as is remote I/O control of emmission and 0 to 10 V analog output.Compatible with the following gauges in the ultra high vacuum range from 10-9 to 10-10:IMG-100, IMG-300 (UHV)Also compatible with competitors gauges (see XGS-600 Instruction/Users Manual .pdf page 2-4 for Cross Reference below.) This is the Inverted Magnetron Ion Gauge (IMG) ONLY. For Complete Board Specifications/Descriptions see XGS-600 Instruction/Users Manual .pdf page A-3 below. The XGS-600 Controller, other cards, gauges and cables sold separately on this website.

This is a Varian Agilent signal cable and hooks up to the XGS-600 controller, Multi-Gauge controller or SenTorr Gauge Controller to the Varian Thermocouple Sensor Transducers. Cable standard 10 foot length. Can be used with the following controllers:Varian Multi-Gauge ControllerVarian Senn Torr Gauge ControllerVarian XGS 600 Gauge Controller This is a the signal cable ONLY. Sensors and controllers sold separately on this website.

This is a Agilent Varian 30 ft. signal cable and hooks up to the XGS-600 controller, Multi-Gauge controller or SenTorr Gauge Controller to Agilent Varian Thermocouple Sensor Transducers.Can be used with the following controllers:Varian Multi-Gauge ControllerVarian Senn Torr Gauge ControllerVarian XGS 600 Gauge Controller This is a the signal cable ONLY. Sensors and controllers sold separately on this website.

This cable connects Agilent ConvecTorr sensors to an Agilent XGS-600 controller, Multi-Gauge controller, or SenTorr Gauge. It is 10 ft. long (3 m). It replaces Agilent PN: L91223010. This is a the signal cable ONLY. Sensors and controllers sold separately on this website.

This cable connects Agilent ConvecTorr sensors to an Agilent XGS-600 controller, Multi-Gauge controller, or SenTorr Gauge. It is 25 ft. long (7.6m). It replaces Agilent PN: L91223025. This is a the signal cable ONLY. Sensors and controllers sold separately on this website.

This is a Agilent Varian signal cable and hooks up to the XGS-600 controller, Multi-Gauge controller or SenTorr Gauge Controller and connects to Agilent Varian ConvecTorr Sensors. Cable 50 foot cable length. Can be used with the following controllers:Varian Multi-Gauge ControllerVarian Senn Torr Gauge ControllerVarian XGS 600 Gauge Controller This is a the signal cable ONLY. Sensors and controllers sold separately on this website.

This is a Varian Agilent signal cable and hooks up to the XGS-600 controller, Multi-Gauge controller or SenTorr Gauge Controller and connects to Varian ConvecTorr Sensors. Cable 50 foot cable length. Can be used with the following controllers:Varian Multi-Gauge ControllerVarian Senn Torr Gauge ControllerVarian XGS 600 Gauge Controller This is a the signal cable ONLY. Sensors and controllers sold separately on this website.

This is a Varian Agilent signal cable and hooks up to the XGS-600 controller, Multi-Gauge controller or SenTorr Gauge Controller to the Varian IMG100 or IMG300 Inverted Magnetron Gauge Sensor CABLE. Cable standard 10 foot length. Can be used with the following controllers:Varian Multi-Gauge ControllerVarian Senn Torr Gauge ControllerVarian XGS 600 Gauge Controller This is a the signal cable ONLY. Sensors and controllers sold separately on this website.

This is a Varian Agilent signal cable and hooks up to the XGS-600 controller, Multi-Gauge controller or SenTorr Gauge Controller to the Varian IMG300 Inverted Magnetron Gauge or IMG-UHV inverted magnetron gauge, CABLE. Bakeable. Cable standard 10 foot length. Can be used with the following controllers:Varian Multi-Gauge ControllerVarian Senn Torr Gauge ControllerVarian XGS 600 Gauge Controller This is a the signal cable ONLY. Sensors and controllers sold separately on this website.

This is a Varian Agilent cable which hooks up to the XGS-600 Controller or Active Gauge Controller to the PVG-500 Pirani Gauge or FRG-700 Pirani/IMG gauge. This is the cable only 50 ft. length all gauges and controllers sold separately on this website. Agilent Varian Part Number R35893050. Can be used with the following Varian Controllers: XGS-600 ControllerActive Gauge Controller ACG-100, AGD-100

This is a Varian Agilent signal cable and hooks up to the XGS-600 controller, Multi-Gauge controller or SenTorr Gauge Controller to the Varian UHV-24 or UHV-24p nude ion gauge tube. Cable standard 10 foot length. Can be used with the following controllers:Varian Multi-Gauge ControllerVarian Senn Torr Gauge ControllerVarian XGS 600 Gauge Controller This is a the signal cable ONLY. Sensors and controllers sold separately on this website.

This is a Varian Agilent cable and hooks up to the XGS-600 controller, Multi-Gauge controller or SenTorr Gauge Controller to the Varian UHV-24 or UHV-24p nude ion gauge tube. Cable standard 25 foot length. Can be used with the following controllers:Varian Multi-Gauge ControllerVarian Senn Torr Gauge ControllerVarian XGS 600 Gauge Controller This is a the signal cable ONLY. Sensors and controllers sold separately on this website.

Works With Newest-Style XGS-600 Hot Cathode Gauge Cards - New cable PN: X3203-60007 These Agilent Varian XGS-600 to MBA2-200T hot cathode ion vacuum gauge cables work with the newest-style MBA 2-200T to hot cathode gauge controller (HFIG) cards for XGS-600 controller and have Agilent Varian part number X3203-60007. These are new and come with full Agilent Varian warranty. These new cables are for the newer versions of the MBA 2-200T dual filament full metal hot cathode ion gauge sensors to XGS 600 controller's only, not compatible with Old Style Varian MBA-100 and MBA-200 sensors.Can be used with the following Agilent Varian Controllers:XGS-600 Vacuum Gauge Combination Controller

Works With Newest-Style XGS-600 Hot Cathode Gauge Cards - New cable PN: X3203-60008 These Agilent Varian XGS-600 to MBA2-200T hot cathode ion vacuum gauge cables work with the newest-style MBA 2-200T to hot cathode gauge controller (HFIG) cards for XGS-600 controller and have Agilent Varian part number X3203-60008. These are new and come with full Agilent Varian warranty. These new cables are for the newer versions of the MBA 2-200T dual filament full metal hot cathode ion gauge sensors to XGS 600 controller's only, not compatible with Old Style Varian MBA-100 and MBA-200 sensors.Can be used with the following Agilent Varian Controllers:XGS-600 Vacuum Gauge Combination Controller

Works With Newest-Style XGS-600 Hot Cathode Gauge Cards - New cable PN: X3203-60006 These Agilent Varian XGS-600 to MBA2-200T hot cathode ion vacuum gauge cables work with the newest style MBA 2-200T to hot cathode gauge controller (HFIG) card for XGS-600 controller and have Agilent Varian part number X3203-60006. These are new and come with full Agilent Varian warranty. These new cables are for the newer versions of the MBA 2-200T dual filament full metal hot cathode ion gauge sensors to XGS 600 controller's only, not compatible with Old Style Varian MBA-100 and MBA-200 sensors.Can be used with the following Agilent Varian Controllers:XGS-600 Vacuum Gauge Combination Controller

This is a Varian Agilent signal cable and hooks up to the XGS-600, Multi-Gauge, and SenTorr Gauge Controller to the Varian Glass Ion Sensor Tubes, 563, 564, 571, 572. Cable standard 10 foot length. This is the cable only all gauges and vacuum controllers sold separately on this website. Can be used with the following Varian Agilent Controllers:XGS-600 ControllerMulti-Gauge ControllerSenTorr Controller

This is a Varian Agilent signal cable and hooks up to the XGS-600, Multi-Gauge, and SenTorr Gauge Controller to the Varian Glass Ion Sensor Tubes, 563, 564, 571, 572. Cable standard 25 foot length. This is the cable only all gauges and vacuum controllers sold separately on this website. Can be used with the following Varian Agilent Controllers:XGS-600 ControllerMulti-Gauge ControllerSenTorr Controller

This is a Varian Agilent signal cable and hooks up to the XGS-600, Multi-Gauge, and SenTorr Gauge Controller to the Varian Glass Ion Sensor Tubes, UHV-24 or UHV-24p. Cable standard 10 foot length. This is the cable only all gauges and vacuum controllers sold separately on this website. Can be used with the following Varian Agilent Controllers:XGS-600 ControllerMulti-Gauge ControllerSenTorr Controller

This is a Varian Agilent signal cable and hooks up to the XGS-600 controller to the Varian FRG-720 Active Gauge Sensor Tube. Cable standard 10 foot length. This is the cable only all gauges and controllers sold separately on this website. Agilent Varin Part Number R35913010.Can be used with the following controller:Varian XGS-600

This is a Varian Agilent signal cable and hooks up to the XGS-600 Controller or Active Gauge Controller to the PVG-500 Pirani Gauge or FRG-700 Pirani/IMG gauge. Standard 10 foot length. This is the cable only all gauges and controllers sold separately on this website. Agilent Varian Part Number R35893010. Can be used with the following Varian Controllers:XGS-600 ControllerActive Gauge Controller ACG-100, AGD-100

Varian Agilent XGS-600 I/O Cable with Flying Leads, 10 foot Length. This is the cable only all gauges and controllers sold separately on this website. Can be used with the following Varian Controllers:XGS-600 Controller

Varian Agilent XGS-600 I/O Cable with Flying Leads, 25 foot Length. This is the cable only all gauges and controllers sold separately on this website. Can be used with the following Varian Controllers:XGS-600 Controller

Varian Agilent XGS-600 I/O Cable with Flying Leads, 50 foot Length. This is the cable only all gauges and controllers sold separately on this website. Can be used with the following Varian Controllers:XGS-600 Controller

This is a Varian Agilent 19 inch rack mounting, DUAL Mount, Side by Side kit for the XGS-600 Multi-gauge Controller. This is the rack kit only all gauges, cables, and vacuum controllers sold separately on this website. Can be used with the following Varian Agilent Controllers:XGS-600 Controller

This is a Varian Agilent 19 inch rack mounting, OFF center kit for the XGS-600 Multi-gauge Controller. This is the rack kit only all gauges, cables, and vacuum controllers sold separately on this website. Can be used with the following Varian Agilent Controllers:XGS-600 Controller

This is a Varian Agilent 19 inch rack mounting, ON center kit for the XGS-600 Multi-gauge Controller. This is the rack kit only all gauges, cables, and vacuum controllers sold separately on this website. Can be used with the following Varian Agilent Controllers:XGS-600 Controller

This is a Varian Agilent XGS-600 Gauge Controller Tilt Stand Accessory, Optional Accessory. This is the Tilt Stand Only all gauges, cables, and vacuum controllers sold separately on this website. Agilent Varian Part Number R3124301. Can be used with the following Varian Agilent Controllers:XGS-600 Controller

This cable connectivity kit is needed for transferring data from an Ideal Vacuum XG-120 digital thermocouple gauge controller or any other controller with a serial output to a remote PLC or computer via RS232 serial communication, when the computer does not have a serial port. Most modern machines do not have a built in serial port, but do have a USB port. This kit consists of a 6 ft. Serial-to-USB cable and null modem adapter (controller sold separately). The cable's DB9 male connector attaches through the null modem adapter onto the back of the controller, which has a DB9 female connector. The USB 2.0 type A connector plugs in to the computer's USB port. Some controllers may have a DB25 serial interface in which case a DB25-to-DB9 adapter would be required.