These medium Ideal Vacuum Super-Seal pneumatic bellows 90° angle valves have ISO-K 63 inlet and outlet ports. They are designed primarily for use in the high-vacuum range (10 Torr), with leak rates of 10 Torr l/s (He) but can be used up to positive pressures of 60-80 psi. These valves are constructed of a 304L stainless steel valve body and mechanism, an aluminum actuator, and Viton bellows seat O-ring seals. Super-Seal valves are bakeable up to 100°C (valve body only). These valves can be mounted in any orientation. These medium-sized Super-Seal valves require air to both open and to close. They do not have a spring return and therefore do not automatically close. Low volume, dry, compressed air in the range of 60-to-80 psi is needed. Because they do not have automatic spring closure, they cannot provide failure protection to preserve chamber vacuum in case of loss of power or air supply.

These medium Ideal Vacuum Super-Seal pneumatic bellows 90° angle valves have ISO-K 80 inlet and outlet ports. They are designed primarily for use in the high-vacuum range (10 Torr), with leak rates of 10 Torr l/s (He) but can be used up to positive pressures of 60-80 psi. These valves are constructed of a 304L stainless steel valve body and mechanism, an aluminum actuator, and Viton bellows seat O-ring seals. Super-Seal valves are bakeable up to 100°C (valve body only). These valves can be mounted in any orientation. These medium-sized Super-Seal valves require air to both open and to close. They do not have a spring return and therefore do not automatically close. Low volume, dry, compressed air in the range of 60-to-80 psi is needed. Because they do not have automatic spring closure, they cannot provide failure protection to preserve chamber vacuum in case of loss of power or air supply.

These medium Ideal Vacuum Super-Seal pneumatic bellows 180° inline valves have ISO-K 63 inlet and outlet ports. They are designed primarily for use in the high-vacuum range (10 Torr), with leak rates of 10 Torr l/s (He) but can be used up to positive pressures of 60-80 psi. These valves are constructed of a 304L stainless steel valve body and mechanism, an aluminum actuator, and Viton bellows seat O-ring seals. Super-Seal valves are bakeable up to 100°C (valve body only). These valves can be mounted in any orientation. These medium-sized Super-Seal valves require air to both open and to close. They do not have a spring return and therefore do not automatically close. Low volume, dry, compressed air in the range of 60-to-80 psi is needed. Because they do not have automatic spring closure, they cannot provide failure protection to preserve chamber vacuum in case of loss of power or air supply.

These medium Ideal Vacuum Super-Seal pneumatic bellows 90° angle valves have ISO-K 100 inlet and outlet ports. They are designed primarily for use in the high-vacuum range (10 Torr), with leak rates of 10 Torr l/s (He) but can be used up to positive pressures of 60-80 psi. These valves are constructed of a 304L stainless steel valve body and mechanism, an aluminum actuator, and Viton bellows seat O-ring seals. Super-Seal valves are bakeable up to 100°C (valve body only). These valves can be mounted in any orientation. These medium-sized Super-Seal valves require air to both open and to close. They do not have a spring return and therefore do not automatically close. Low volume, dry, compressed air in the range of 60-to-80 psi is needed. Because they do not have automatic spring closure, they cannot provide failure protection to preserve chamber vacuum in case of loss of power or air supply.

These medium Ideal Vacuum Super-Seal pneumatic bellows 90° inline valves have ISO-K 80 inlet and outlet ports. They are designed primarily for use in the high-vacuum range (10 Torr), with leak rates of 10 Torr l/s (He) but can be used up to positive pressures of 60-80 psi. These valves are constructed of a 304L stainless steel valve body and mechanism, an aluminum actuator, and Viton bellows seat O-ring seals. Super-Seal valves are bakeable up to 100°C (valve body only). These valves can be mounted in any orientation. These medium-sized Super-Seal valves require air to both open and to close. They do not have a spring return and therefore do not automatically close. Low volume, dry, compressed air in the range of 60-to-80 psi is needed. Because they do not have automatic spring closure, they cannot provide failure protection to preserve chamber vacuum in case of loss of power or air supply.

This is a 12 VDC double-acting solenoid kit used on all medium Ideal Vacuum Super-Seal pneumatic bellows valves including 90 degree angle and inline valves. The kit includes a 1/8" to 1/4" brass NPT elbow and a 1/8" NPT male-to-female short brass extension needed to attach the solenoid (1/4" NPT) to the 1/8" female NPT air inlet of any medium sized Super-Seal valve. Also included are two straight and one elbow push-to-connect fittings with 1/8" NPT to 1/4" OD tubing for the airline connections, and two 1/8" NPT sintered brass exhaust mufflers. This solenoid requires a 12 VDC power source capable of supplying a current of 425mA. This double-acting solenoid kit is used on these medium Super-Seal pneumatic bellows valves:

This is a 24 VDC double-acting solenoid kit used on all medium Ideal Vacuum Super-Seal pneumatic bellows valves including 90 degree angle and inline valves. The kit includes a 1/8" to 1/4" brass NPT elbow and a 1/8" NPT male-to-female short brass extension needed to attach the solenoid (1/4" NPT) to the 1/8" female NPT air inlet of any medium sized Super-Seal valve. Also included are two straight and one elbow push-to-connect fittings with 1/8" NPT to 1/4" OD tubing for the airline connections, and two 1/8" NPT sintered brass exhaust mufflers. This solenoid requires a 24 VDC power source capable of supplying a current of 200mA. This double-acting solenoid kit is used on these medium Super-Seal pneumatic bellows valves:

This is a 110 VAC double-acting solenoid kit used on all medium Ideal Vacuum Super-Seal pneumatic bellows valves including 90 degree angle and inline valves. The kit includes a 1/8" to 1/4" brass NPT elbow and a 1/8" NPT male-to-female short brass extension needed to attach the solenoid (1/4" NPT) to the 1/8" female NPT air inlet of any medium sized Super-Seal valve. Also included are two straight and one elbow push-to-connect fittings with 1/8" NPT to 1/4" OD tubing for the airline connections, and two 1/8" NPT sintered brass exhaust mufflers. This solenoid requires a 110 VAC power source capable of supplying a current of 70mA. This double-acting solenoid kit is used on these medium Super-Seal pneumatic bellows valves:

This is a 220 VAC double-acting solenoid kit used on all medium Ideal Vacuum Super-Seal pneumatic bellows valves including 90 degree angle and inline valves. The kit includes a 1/8" to 1/4" brass NPT elbow and a 1/8" NPT male-to-female short brass extension needed to attach the solenoid (1/4" NPT) to the 1/8" female NPT air inlet of any medium sized Super-Seal valve. Also included are two straight and one elbow push-to-connect fittings with 1/8" NPT to 1/4" OD tubing for the airline connections, and two 1/8" NPT sintered brass exhaust mufflers. This solenoid requires a 220 VAC power source capable of supplying a current of 35mA. This double-acting solenoid kit is used on these medium Super-Seal pneumatic bellows valves:

The mechanical Reed-type position indicator sensor detects and is activated when the magnetic field generated by the top of the Super-Seal valve actuator aligns with the sensor. A red LED illuminates when the sensor is triggered. In addition to providing visual confirmation of the valve's state (whether it is open or closed), the Reed sensor can also be used to switch or trigger an auxiliary device. Super-Seal valves have two position indicator sensor slots in their valve heads, one long, one short. This sensor is activated and illuminates when: the valve is open and the sensor is in the short slot.the valve is open and the sensor is positioned at the top of the long slot.

The NPN-type transistor position indicator sensor detects and is activated when the magnetic field generated by the top of the Super-Seal valve actuator aligns with the sensor. A red LED illuminates when the sensor is triggered (the PNP-type sensor has a green LED). In addition to providing visual confirmation of the valve's state (whether it is open or closed), the NPN sensor can also be used to switch or trigger an auxiliary device. Super-Seal valves have two position indicator sensor slots in their valve heads, one long, one short. This sensor is activated and illuminates when: the valve is open and the sensor is in the short slot.the valve is open and the sensor is positioned at the top of the long slot.

The PNP-type transistor position indicator sensor detects and is activated when the magnetic field generated by the top of the Super-Seal valve actuator aligns with the sensor. A green LED illuminates when the sensor is triggered (the NPN-type sensor has a red LED). In addition to providing visual confirmation of the valve's state (whether it is open or closed), the PNP sensor can also be used to switch or trigger an auxiliary device. Super-Seal valves have two position indicator sensor slots in their valve heads, one long, one short. This sensor is activated and illuminates when: the valve is open and the sensor is in the short slot.the valve is open and the sensor is positioned at the top of the long slot.