This is our Basic Level
ExploraVAC TVAC thermal vacuum test chamber system, perfect for entry level vacuum processes and optimized for low-cost and ease of use. It is a fully integrated, turnkey, rough vacuum system featuring a large 20 inch cube welded stainless-steel vacuum chamber, a hinged stainless steel door with viewport, and a volume of 4.6 cubic feet. This system includes an Edwards nXDS20i dry scroll rough vacuum pump, and an integrated Convectron gauge controller to provide chamber vacuum pressure measurements. This basic
ExploraVAC system can reach an ultimate pressure of 20 mTorr, weighs 824 lbs. and requires single-phase, 208-240 VAC, 50/60 Hz, at 17 Amps.
Rough vacuum chambers are used for many scientific and industrial processes. Many sensitive samples or products need to be stored under vacuum to prevent degradation. Much scientific instrumentation is done under vacuum to avoid the interference and absorption of air or other gas particles. Vacuum coating processes, such as vacuum sputtering, physical vapor deposition (PVD), and chemical vapor deposition (CVD) are used to apply very thin functional, protective, or decorative coats to parts or substrates. Rough vacuum can also be used to remove water or other residual vapors from samples, precursors, or high purity parts, such as in freeze drying and plastic or epoxy curing. Rough vacuum is used during heat treatment processes to enhance impurity removal and prevent damage to the substrate from oxygen at high temperature.
ExploraVAC Basic Level System Configuration:
See the performance graph PDF download below for all option's performance data.
- 20 Inch Cube Welded Stainless Steel Chamber
- Stainless Steel Front Chamber Door with Viewport
- Edwards nXDS20i Dry Scroll Vacuum Pump
- QTY2 LF-200 Side Ports (Allow for a variety of feedthroughs to be added from either side of the chamber)
The
ExploraVAC series of TVAC thermal vacuum chamber process and test instruments create precise environments empowering the operator with complete control over internal chamber pressure and temperature. They are built with innovation in mind. They allow for prototype device exploration in vacuum during the product research and development phase and for precise process control in small batch processing. These thermal vacuum test chamber instruments are designed to allow users to quickly tailor experiments to gather product analysis and diagnostics data as the product is subjected to the extreme stress factors of vacuum and temperature.
ExploraVAC TVAC thermal vacuum test chambers are completely configurable with many available system options (see product configurator above).
ExploraVAC System Configuration Options:
- Roughing Pump (dry scroll or dry multi-stage roots, various speeds)
- High Vacuum (various speeds)
- Full Vacuum Pressure Control
- Heated and Cooled Platen
- Chamber Wall Heating
- Integrated Chamber Lighting
- Closed-Loop Refrigerated or LN2Cryogenic Cooling System
- Automated Software Control
- Remote Control Operation
- Purge Ports, Chamber Shelving, and Much More
A large selection of vacuum chambers is available for
ExploraVAC, including welded stainless steel chambers with (internal) cubic sizes (12, 16, 20, or 24 inch) or Ideal Vacuum Cube™ modular chambers with (internal) cubic sizes (9, 12, or 24 inch). Chambers can be configured with aluminum or stainless steel doors, with or without viewports.
The
ExploraVAC TVAC system cabinet has a conveniently angled front panel control surface with colored LED pushbutton interface which controls all chamber functions. PID controllers and gauges are installed as required for user selected options. A PLC manages system functions including pump and valve sequencing for efficient pump down cycles and safety interlocks for preventing equipment damage. The front accessible, built-in NEMA style enclosure houses the electronics needed for system operation.
A spacious LF-200 side port is available for user-selected or designed accessories, such as an electronic feedthrough for device monitoring or shock testing, an infrared lamp array for radiant heating or temperature differential tests, or an ultraviolet lamp array for ionizing radiation tests. This system could be customized to obtain any desired rate of rise by adding additional vacuum pumps mounted outside the cabinet.
The back of the cabinet holds a bulkhead feedthrough panel for chamber venting, pump exhaust, and the purge gas option. A digital feedthrough back panel has multiple ports including a DB9 connector for running the system remotely from a workstation or laptop running Microsoft Windows10 or 11 with our
AutoExplor™ software.
The (non-expiring) basic version of
AutoExplor (P1012102) allows a user to manually control devices while protecting the system.
AutoExplor properly sequences pumps and automatically operates the correct valves for a given request. The user can program pressure and temperature setpoints, ramp rates, soak times, and venting (if the system is equipped with those hardware options). The software provides real-time graphical data streaming so the user can visualize system behavior.
AutoExplor maintains an internal preventive maintenance schedule and notifies the user when system service is due. For example, it notifies when scroll pump tip-seal replacements are needed and when sensor calibration is due. This helps keep the system at peak operating performance. It also provides fault and error messages along with specific troubleshooting information in the case of a device failure so that the issue can be corrected as soon as possible.
The premium version of
AutoExplor (P1012100) includes all the features of the basic software package (above) and adds automated recipe control, data logging, and log export capabilities. Complex test recipes can be created as a step-by-step process, where each step can control the on/off state, setpoints, and ramp rates of multiple devices. One or multiple end conditions for each recipe step may be set using logical operators. The premium version allows the user to quickly generate environmental TVAC test reports from recipe data log files. Logs can be reviewed to ensure targeted process parameters are achieved. The premium version also includes
AutoExplor IP Client, which gives the software the ability to be used as a host that can manage multiple external network clients, and
AutoExplor API (application programming interface), which allows a scientist or programmer to integrate an
ExploraVac instrument into their existing software test suite without using
AutoExplor’s software interface. The premium version must be renewed annually or it reverts to the basic version.
The
ExploraVAC series of TVAC pressure and temperature-controlled test chambers are a perfect solution for many product testing requirements.
Sample Applications
- Environmental Testing Chamber
- Altitude Test Chamber
- Space Simulation Test Chamber
- Thermal Shock Chamber
- Aerospace & Aeronautical Engineering Test Chamber
- High Altitude Flight Component Testing
- Vacuum Oven
- Vacuum Freeze Drying
- Plastic & Epoxy Curing & Outgassing
IVP Welded Vacuum Chamber Drawings, 12", 16", 20", and 24".pdf
eDrawings Viewer For Windows
