Agilent Varian IMG-300 Inverted Magnetron High-Vacuum Gauge, 2.75 in. CFF Conflat Flange
Pressure Range: 1 × 10-3 Torr to 5 × 10-11 Torr.
This is a Agilent Varian IMG-300 UHV Inverted Magnetron High-Vacuum Gauge, 2.75 in. CFF Conflat Flange, Pressure Range: 1 × 10-3 Torr to 5 × 10-11 Torr. Maximum Bakeout Temperature: 250 °C (with cable and magnet attached), Materials Exposed to vacuum: Stainless steel, nickel, glass, nickel alloy 52.
The IMG-300 inverted magnetron gauge combines excellent ultra-high vacuum measurement capability with fast pressure
response. This sensor is optimized for UHV applications such
as particle accelerators, synchrotron light beam lines and
energy research applications, where stable UHV pressure
measurement and fast pressure response are equally critical.
Inverted magnetron gauges have no x-ray limit, so the ability
to read extremely low pressure is limited only by the number
of gas molecules present.
The magnetic design provides superior sensitivity at UHV
pressures and ensures starting within 30 seconds at 1 x 10-10
Torr (millibar). With no hot filament, there is minimal
outgassing from within the gauge that would degrade absolute
accuracy of pressure response, and there is no electron or
photon emission to disrupt an experimental process.
The all-metal gauge design is radiation-resistant and bakeable
to 250 °C during operation, while the locking SHV high-voltage
connector ensures safety and positive electrical contact.
Radiation-resistant, bakeable cables are also available.
The IMG-300 is easily interfaced with Varian Agilent XGS-600 gauge controller and other controllers for integration into a variety of vacuum systems, or
for use as a stand-alone pressure measurement tool.
This is the Agilent Varian IMG-300, 2.75 in. CFF Conflat Flange, gauge only, signal cable and controller sold separately on this website. For complete operating instructions scroll down to (AVAILABLE DOWNLOADS:) and download the Instruction Manual, Spec Sheet and other pertinent information Pdf's. Agilent Varian Part Number R0343301.
Can be used with the following controllers:
- Varian Multi-Gauge Controller
- Varian Senn Torr Gauge Controller
- Varian XGS 600 Gauge Controller
