These Agilent Varian TPS mobile systems come with an Agilent 74 FS turbo pump, having a 60 l/s pumping speed, ISO-63K inlet flange, IDP-7 dry scroll roughing pump, and 74-FS AG rack mount controller. They are plug and play, a complete self contained ultra-high vacuum pumping systems, just plug in and pump down. All that is required is the hardware and pressure gauges necessary to connect to your chamber or vacuum process. The Agilent 74 FS turbo pump with a CF flange are true ultra-high vacuum (UHV) pumps with an ultimate pressure into the 10-10 Torr range (if all-metal intake seal gaskets are used and the vacuum chamber is completely clean and baked out). Agilent 74 FS turbo pumps with ISO-K flanges are limited (by permeation and outgassing of the rubber/elastomer O-ring seals) to an ultimate pressure in the 10-8 Torr range. The intake flange of these pumps (CF flange only) can be baked up to 100 °C when the turbo is water cooled.

These Agilent Varian TPS mobile systems come with an Agilent 74 FS turbo pump, having a 60 l/s pumping speed, Conflat CF 4.50 inlet flange, IDP-7 dry scroll roughing pump, and 74-FS AG rack mount controller. They are plug and play, a complete self contained ultra-high vacuum pumping systems, just plug in and pump down. All that is required is the hardware and pressure gauges necessary to connect to your chamber or vacuum process. The Agilent 74 FS turbo pump with a CF flange are true ultra-high vacuum (UHV) pumps with an ultimate pressure into the 10-10 Torr range (if all-metal intake seal gaskets are used and the vacuum chamber is completely clean and baked out). Agilent 74 FS turbo pumps with ISO-K flanges are limited (by permeation and outgassing of the rubber/elastomer O-ring seals) to an ultimate pressure in the 10-8 Torr range. The intake flange of these pumps (CF flange only) can be baked up to 100 °C when the turbo is water cooled.

These Agilent Varian TPS-mobile systems come with an Agilent 305 FS turbo pump, having a 255 l/s pumping speed, ISO-100K inlet flange, IDP-7 dry scroll roughing pump, and 305-FS AG rack mount controller. They are plug and play, a complete self contained ultra-high vacuum pumping systems, just plug in and pump down. All that is required is the hardware and pressure gauges necessary to connect to your chamber or vacuum process. The Agilent 305 FS turbo pump with a CF flange are true ultra-high vacuum (UHV) pumps with an ultimate pressure into the 10-10 Torr range (if all-metal intake seal gaskets are used and the vacuum chamber is completely clean and baked out). Agilent 305 FS turbo pumps with ISO-K flanges are limited (by permeation and outgassing of the rubber/elastomer O-ring seals) to an ultimate pressure in the 10-8 Torr range. The intake flange of these pumps (CF flange only) can be baked up to 100 °C when the turbo is water cooled.

These Agilent Varian TPS-mobile systems come with an Agilent 305 FS turbo pump, having a 255 l/s pumping speed, Conflat CFF 6 inch inlet flange, IDP-7 dry scroll roughing pump, and 305-FS AG rack mount controller. They are plug and play, a complete self contained ultra-high vacuum pumping systems, just plug in and pump down. All that is required is the hardware and pressure gauges necessary to connect to your chamber or vacuum process. The Agilent 305 FS turbo pump with a CF flange are true ultra-high vacuum (UHV) pumps with an ultimate pressure into the 10-10 Torr range (if all-metal intake seal gaskets are used and the vacuum chamber is completely clean and baked out). Agilent 305 FS turbo pumps with ISO-K flanges are limited (by permeation and outgassing of the rubber/elastomer O-ring seals) to an ultimate pressure in the 10-8 Torr range. The intake flange of these pumps (CF flange only) can be baked up to 100 °C when the turbo is water cooled.