With Windows at Brewster's Angle 56°, Rotatable Mount With Viton Seals. Our Ideal Spectroscopy optical arm assemblies are precision-engineered for superior light control. Unlock the full potential of your spectroscopy and optical experiments, they are designed to optimize laser light interaction within vacuum chambers while minimizing unwanted background noise, greatly eliminating the laser scatter that is generated when the beam passes through the exit window. Spectroscopy relies on the interaction of light with matter, where light can be absorbed, reflected, or scattered by a medium. To achieve precise measurements, it is essential to efficiently guide an intense laser beam into the experimental vessel while reducing the background noise caused by laser light scattering off the inside of the chamber that can overwhelm the optical detector. Our optical arms are engineered to enhance the signal-to-noise ratio, ensuring maximum fluorescence, phosphorescence, and Raman scattering detection while minimizing stray light interference.

This listing is for an Ideal Spectroscopy Baffle Kit which is an optional accessory and used in our Optical Arm Assemblies to control laser light scattered off the exit window. These are supplied with both 4-mm and 10-mm aperature baffles, which made from 6061-T6 aluminum and black anodized. Our Ideal Spectroscopy optical arm assemblies are precision-engineered for superior light control. Unlock the full potential of your spectroscopy and optical experiments, they are designed to optimize laser light interaction within vacuum chambers while minimizing unwanted background noise, greatly eliminating the laser scatter that is generated when the beam passes through the exit window.

This O-ring is a replacement part for our Ideal Vacuum optical arm assemblies, it is used to create the vacuum seal below the window and is made of Viton. Our Ideal Spectroscopy optical arm assemblies are precision-engineered for superior light control. Unlock the full potential of your spectroscopy and optical experiments, they are designed to optimize laser light interaction within vacuum chambers while minimizing unwanted background noise, greatly elimating the laser scatter that is generated when the beam passes through the exit window.

This O-ring is a replacement part for our Ideal Vacuum optical arm assemblies, it is used to create the vacuum seal between the Brewster's window mount & main optical arm, it is made of Viton. Our Ideal Spectroscopy optical arm assemblies are precision-engineered for superior light control. Unlock the full potential of your spectroscopy and optical experiments, they are designed to optimize laser light interaction within vacuum chambers while minimizing unwanted background noise, greatly elimating the laser scatter that is generated when the beam passes through the exit window.

This UV Fused Silica Window is a replacement part for our Ideal Vacuum optical arm assemblies, it is used to create the vacuum seal and laser beam feedthrough. It is 2.0 mm thick and made of UV grade fused silica. Our Ideal Spectroscopy optical arm assemblies are precision-engineered for superior light control. Unlock the full potential of your spectroscopy and optical experiments, they are designed to optimize laser light interaction within vacuum chambers while minimizing unwanted background noise, greatly elimating the laser scatter that is generated when the beam passes through the exit window.

These bolt kits contain silver-plated 12-Point head bolts and washers to fasten tapped hole 2.75 (2-3/4) inch CF Conflat flanged fittings. These confalt flages can be pumped down to 10-13 torr (10-11 Pa) and can be heated to 450 °C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 ("mini conflat"), 2-1/8, 2-3/4, 4-1/2, 4-5/8, 6, 6-3/4, 8, 10, 12, 13-1/4, 14 and 16-1/2. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250.Complete Kit - 2.75 (2-3/4) inch Conflat Tapped Bolt Hole Fasteners:QTY 6, Silver-Plated 1/4-28 x 0.875 Inch Long 12-Point Head Bolts

These conflat Viton gaskets fit a conflat flange size of 2.75 inches. They have been pre-baked and degassed to limit the outgassing in your vacuum system. They can also be used for testing and multiple times for assembly and disassembly. The knife edge of the CF flange presses against the Viton gasket but does not cut into it, making it reuseable, unlike the CF copper or silver gaskets that can only be used once. North American flange sizes are given by flange outer diameter in inches: 1.33" ("mini conflat"), 2.125", 2.75", 3.375", 4.50", 4.625", 6.00", 6.75", 8.00", 10.00", 12.00", 13.125", 14.00", and 16.50". In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250.

NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 6 x 6 inch plate with one CF 2.75" centered Conflat port. The plate is machined from 6061-T6 aluminum and powder coated blue. This Conflat CF ported plate has 1/4-28 UNF tapped holes for mounting a turbo pump or CF flanged tubing. The plate's Conflat port requires six (6) 1/4-28 x 7/8" long, silver-plated, 12 point bolts (P104404). The CF port is not compatible with metal gaskets. Use only Viton seals (P104341). Cube baseline vacuum is 1 x 10 Torr. Features:6 x 6 plate6061-T6 aluminumBlue powdercoatSingle CF 2.75" port with 1/4-28 UNF tapped holes

NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 6 x 12 inch plate with one CF 2.75" centered Conflat port. The plate is machined from 6061-T6 aluminum and powder coated blue. This Conflat CF ported plate has 1/4-28 UNF tapped holes for mounting a turbo pump or CF flanged tubing. This plate's Conflat port requires six (6) 1/4-28 x 7/8" long, silver-plated, 12 point bolts (P104404). The CF port is not compatible with metal gaskets. Use only Viton seals (P104341). Cube baseline vacuum is 1 x 10 Torr. Features:6 x 12 plate6061-T6 aluminumBlue powdercoatSingle CF 2.75" port with 1/4-28 UNF tapped holes

NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 9 x 9 inch plate with one centered CF 2.75" Conflat port. The plate is machined from 6061-T6 aluminum and powder coated blue. This Conflat CF ported plate has 1/4-28 UNF tapped holes for mounting a turbo pump or CF flanged tubing. This plate's Conflat port requires six (6) 1/4-28 x 7/8" long, silver-plated, 12 point bolts (P104404). The CF ports are not compatible with metal gaskets. Use only Viton seals (P104341). Cube baseline vacuum is 1 x 10 Torr. Features:9 x 9 plate6061-T6 aluminumBlue powdercoatOne CF 2.75" Conflat port with 1/4-28 UNF tapped holes

NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 12 x 12 inch plate with one CF 2.75" centered Conflat port. The plate is machined from 6061-T6 aluminum and powder coated blue. This Conflat CF ported plate has 1/4-28 UNF tapped holes for mounting a turbo pump or CF flanged tubing. The plate's Conflat port requires six (6) 1/4-28 x 7/8" long, silver-plated, 12 point bolts (P104404). The CF port is not compatible with metal gaskets. Use only Viton seals (P104341). Cube baseline vacuum is 1 x 10 Torr. Features:12 x 12 plate6061-T6 aluminumBlue powdercoatSingle CF 2.75" port with 1/4-28 UNF tapped holes