Skip to main content
× Home Products Downloads About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
cart
 
Login Icon
login

Keyword       Ideal Spectroscopy Part Number       Manufacturer Part Number

× Molecular-Spectroscopy Optical-Table-Accessories Absorption-Spectroscopy-Gas-Cells Ultra-High Purity Gas Products Pulse-Valves-For-Jet-Cooling Vacuum-Pressure-Measurement Fittings-and-Flanges Vacuum-Valves Vacuum-Pumps Modular-Vacuum-Chambers

Condition:
  New
Part Number:
  P1010146
Warranty:
  Full Manufacturer's Warranty

Available Now: 
19  

RoHS Compliance Sticker


$377.10


Print Version

MKS Series 225 Auto-Soft Start Check Valve - Flow Actuated - Spring Loaded - SS - Viton - NW40 KF40 Centering Ring


MKS Series 225 Auto-Soft Start Check Valve Flow Actuated, Spring Loaded, No Voltage
NW40 KF40 Viton Centering Ring - STAINLESS STEEL

The MKS Series 225 Auto-Soft is a flow actuated check valve used for throttling roughing pumps during initial evacuation. Auto-Soft closes very quickly at the start of system evacuation and opens automatically upon reaching a set pressure differential. This leaves the pumping line open for the balance of the pumping process.

This is a simple NW KF Valve fitting for automatic soft starts. The Auto-Soft valve has a vane that pivots about an off-center axis. A pair of coil springs hold the vane open when the pressure differential is low enough. When the roughing system goes into operation, the initial flow closes the vane assembly, automatically throttling the roughing pump. Initial pumpdown occurs through small openings around the vane. This reduces the effective pumping speed, which minimizes turbulence and extends pumpdown time. When the pressure differential reaches the level determined by the springs, the springs open the vane and full pumping speed is restored.

When installing the Auto-Soft, adequate space is needed, the amounts are listed in the specifications table. The user can adjust the closed conductance of the valve over a limited range by bending tabs adjacent to the vane. The Auto-Soft should be installed between the vacuum system and the roughing valve. Trapping of contamination before the Auto-Soft will help to ensure a long life.

FEATURES & BENEFITS:
  • Reduces particulate contamination by reducing system turbulence during venting
  • Prevents displacement or breakage of substrates
  • Replaces expensive pressure controlled bypass systems
  • No electric - flow actuated
  • Operates up to 10,000 cycles
For a complete explanation of this MKS Auto-Soft Check Valve see .pdf to the side.


Press ESC to Close


PDF Logo RoHS Compliance Download

PDF Logo MKS 225 Auto-Soft Flow Activated Check Valve Data Sheet.pdf



You may wish to consider the following products:

Ideal Vacuum Logo Water Mark
CONTACT US
Ideal Spectroscopy
5910 Midway Park Blvd NE,
Albuquerque, NM 87109-5805

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealspectroscopy.com



Press ESC to Close


deepbox image 2