(Replacement for Obsolete Alcatel ACT 200TH Turbo Controller) This Alcatel Act 100 OEM Board turbo pump controller is compatible with the following Alcatel Turbo Molecular Pumps: • ATP80, ATP80C, ATP100, ATP100C, MDP-5011, MDP-5011CP •. The Alcatel Act 100 OEM Board Turbo controller does not come with cables, but cables are available. These Alcatel Act 100 OEM Board Turbo controllers are NEW. To see comparison of ACT OEM 100 with OBSOLETE ACT 200TH Controller see .pdf to the left.FEATURES: Power supply: 100,115, 200 - 230 V selectable • Dimensions: 213.2 x 97.5 x 96.5 mm (8.39 x 3.84 x 3.80 inches) • ON/OFF Switch, Status LEDs • Remote Control: ON/OFF/Pump started/ Pump at speed/Fault.

These Adixen Alcatel 1025 Drytel turbo drag pump internal power supply boards are design to power the control board which operates the MDP-5011 turbo drag pump. The power supply board is one of two board that are required, the other being the turbo drag pump driver control board. These internal power supply replacement boards are relatively easy to replace, are responsible for powering up the driver control board which spinning up the turbo drag pump, and have Pfeiffer Adixen part number P0330E1.

These Adixen Alcatel Drytel 30, Drytel 31, and Drytel 1025 turbo drag vacuum pump bearing replacement rebuild kit include the items need to rebuild turbo drag pump in most Drytel 30, Drytel 31, and Drytel 1025 systems. These kits include two turbo bearings and a bearing grease syringe. This kit does not include the tools or detailed instructions that are required for the first time service technician training. These rebuild kits are designed to replace the bearings in old Drytel systems with the Adixen Alcatel MDP-5010 and MDP-5011 turbo pumps that have become increasingly noisy. For the best results please contact with the correct bearing under size dimensions that are posted on the side of your pump. These under size dimensions are listed after the serial number on the pumps data plate, e.g., 34, 24, etc. These dimensions specify that the best fit bearings should be under sized for your pumps shaft. Please contact us for more information about our Drytel rebuild services if needed.

This Thermal Sensor Replacement is for an Adixen ATP 80 Turbo Molecular Pump. We service Alcatel-Adixen Turbo pumps right here at Ideal Vacuum. If you have questions or would like a quote, please give us a call at 505-872-0037

These Adixen Alcatel 1025 Drytel turbo drag pump internal driver control boards are design to operate the MDP-5011 turbo drag pump. The driver control board is one of two board that are required, the other being the power supply board. These internal driver control replacement boards are relatively easy to replace, are responsible for spinning up the turbo drag pump, and have Pfeiffer Adixen part number P0365E1.

This cable connects the controller to the following Alcatel Turbo Pumps • 5400 • 5400 CP • 5030 • 5150 type 8220. The Cable is 3 meters (10ft.) long. This is the cable only, pump and controller sold separately.

This Turbo Pump-to-Controller cable connects the Pfeiffer Balzers TPH/U 050, 060, 062, 100, 110, 170, 190, 240, 260, 330, 510, 520 turbomolecular vacuum pump to the TCP-040, TCP-120, TCP-121, TCP-300, TCP-310, TCP-380, TCP-600 and other controllers. This cable is used for many models of Pfeifer Balzers turbo pumps.

PN: A461237-035. This new Adixen Alcatel cable is used to connect the ACT 250, ACT 600 T, ACT 1000 controllers to ATP 150, ATP 150C, ATP 400, ATP 400C, ATP 400 HPC, ATP 900, ATP 900C, & ATP 900 HPC turbo pumps. The cable is 3.5 Meters long and has Adixen part number A461237-035.

These Adixen Alcatel Drytel 30 and Drytel 31 dry diaphragm vacuum pump gasket rebuilt kit include the items need to rebuild the diaphragm pumps in most Drytel 30 and Drytel 31 systems. These kits include the rubber diaphragms and hardware need to replace the diaphragms and head gaskets. This kit does not include the diaphragm pump motor bearings which are needed if the diaphragm pump is becoming increasingly noisy. Please contact us for diaphragm pump rebuild service if diaphragm pump bearings are needed.

PN: A463207-035. This new Adixen Alcatel cable is used to connect the ACT200TH controller to ATP 80, ATP 80C, ATP 100, & ATP 100C turbo pumps. The cable is 3.5 Meters long and has Adixen part number A463207-035.

This 3 meter long cable, with 9-Pin D-sub connector on one end and M12 socket connector on the other, connects select DigiLine gauges to DPG109 or HiPace TCs in specific configurations: A) Connect Pfeiffer DigiLine Gauges with M12 Socket to a Pfeiffer DPG109 or, B) Connect Pfeiffer DigiLine Gauges with 9 pin D-Sub to Pfeiffer HiPace TC This listing is only for the Pfeiffer cable and end connectors only, as illustrated. All Pfeiffer controllers and gauges sold separately on this website. Operating instructions and specifications may be available within the downloadable PDF.

This is a Seal Kit for the Adixen Alcatel ATP 80, ATP 150 Turbo Pumps. We service Alcatel-Adixen Turbo pumps right here at Ideal Vacuum. If you have questions or would like a quote, please give us a call at 505-872-0037

This is a 110VAC Power Cable for Pfeiffer Balzer Controllers TCP120, TCP121, TCP380.

This Pfeiffer Balzers connect can be used to make an AC input cable for the Pfeiffer TCP-040, TCP-270, TCP-300, TCP-305, and TCP-310 turbo pump controllers. You must solder on an AC power cord blank to use this connector. The instructions for making some connection are shown above.