Agilent Varian Turbo-V 81-AG Navigator Solid State Vacuum Pump Controller PN 9698996 This Agilent Varian Turbo-V81-AG Navigator Controller is a single-state controlled frequency converter with the following features.Drives the pumps of the Turbo-V81 Family.Powers the pump cooling fan.Drives the vent valveProvides and acquires the pressure of the wide range gauge.Remote I/O compatible with the previous verson.Navigator default serial compatible with the previous RS 232 and 485 versionAble to operate with Active Gauges (IM-500, Full Range Gauge Frg-700 and FRG-702). These Agilent Varian Turbo-V 81-AG Navigator controllers are driven by a single chip microcomputer and consist of two PCBs which include power supply and 3-phase output, analog and I/O section, microprocessor and digital section. The power supply, together with the 3-phase output converts the single phase AC mains supply or 24Vdc supply into a 3-phase low voltage, medium frequency output which is required to power the pump. These controllers have a serial port RS-232/485 which allows the pump to be interfaced with the system controls and to be operated via PC with T-Plus Software.

Agilent Varian TwisTorr On-Board 24V DC Turbo Navigator Controller for use with the Agilent TwisTorr 304 FS Turbo. This controller is designed to be used in an existing system and not as a stand alone unit. The TwisTorr 304 FS is a compact, reliable, energy efficient 300 l/s turbo drag pump with innovative breakthrough technologies that have lead to outstanding performace. They are designed for reliability and feature the new Agilent floating suspension. This ensures that the turbo has low vibration, low acoustical noise, optimal working conditions for the bearings with extended operating life and exceptional stability for demanding SEM applications. The base pressure for the TwisTorr 304 FS is as low as 1x10

These Agilent Varian Turbo-V 551, V 701 pumps air cooling fan kits are designed to work with the Navigator bottom or side mount controllers (Turbo-V 551, Turbo-V 701) and have Agilent Varian Part Number 9699339. These kits include the air cooling fan, power cable to connect the cooling fan to 24 VDC supply on the Navigator controller through P4 connector, and bottom of pump mounting style bracketing.

These Agilent Varian Turbo-V 551 and Turbo-V 701 Pump air cooling fan kits are designed to work with the V550 or V700HT rack-mount controllers and have Agilent Varian Part Number 9699314. These kits include the air cooling fan, power cable to connect the cooling fan to 120 VAC supply on the auxiliary power J6 connectors (1 Amp max output) on back side of V550 or V700HT rack-mount controller, and bottom of pump mounting style bracketing.

These Agilent Varian V81 turbo pump water cooling kits are stainless steel with stainless steel line connections. They are designed to mount to the bottom of the V81T and V81M turbo molecular vacuum pumps. These kits include the hardware needed for properly installation on the turbo pump and have Agilent Varian part number 9699823. The installation instructions can be found by downloading the pdf catalog and documents below. With the Turbo-V 81 turbo molecular pumps, and thanks to one of the features of the MacroTorr® technology you can now reduce the cost of your vacuum system and get better performance at the same time. These Varian Turbo V81 pumps, series T or M, have the most effective pumping stage technology currently available. It is designed for Very High gas load operations, has a monolithic rotor and maintenance free ceramic ball bearings. With no oil, no refill, and no contamination. Now with T-Plus Software you can connect your laptop directly to the pump control unit and start to use it. You can start or stop the pump, as well as check its temperature, gas load conditions, parameters and diagnostics.

To reach base pressure in a vacuum chamber or system in the shortest possible time, it is recommended to bake out the chamber and at the same time to bake out the Turbo-V pump. For this purpose we offer a heater band to go around the Turbo Pump. This heater band is shaped to fit the upper part of the pump and will automatically heat it to a temperature of about 80°C (176°F). This is a Heater Band for Varian Turbo-V 301 Navigator, V200, V250, V 300HT Series Turbo Pumps, 120 VAC, (This is the Heater Band ONLY, does not come with turbo pump). A PDF installation diagram is below for download.

Agilent Varian Bracket for Onboard Side Mounting for the Agilent TwisTorr 304FS Turbo Pump. The TwisTorr 304 FS is a compact, reliable, energy efficient 300 l/s turbo drag pump with innovative breakthrough technologies that have lead to outstanding performace. They are designed for reliability and feature the new Agilent floating suspension. This ensures that the turbo has low vibration, low acoustical noise, optimal working conditions for the bearings with extended operating life and exceptional stability for demanding SEM applications. The base pressure for the TwisTorr 304 FS is as low as 1x10 Torr when backed with the recommended roughing pump. The new Twistorr 304FS offers a blend of performance and features that is suited for a wide range of applications.

These adapters are KF-25 to 1/4 in. NPT MALE pipe thread. They are commonly used to make connections between ISO-KF 25 and 1/4 inch NPT-Male pipe. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and rubber olastomer o-ring connect the flanges together. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel. Adapter KF-25 to 1/4 in. NPT-M Pipe, Stainless Steel Flange Size: ISO-KF NW-25 Pipe Thread: 1/4 in. NPT-MALE

This an Agilent Varian Inlet Screen DN63 for Varian Turbo-V 81-M ISO.Varian V81M ISO-63 Inlet Screen:For Agilent Varian Turbo Vacuum Pumps - Fits The Following Agilant Varian Vacuum PumpsVarian Turbo-V 81-M series ISO (sold as 1 each)Material stainless steelVarian Part Number

This Agilent Varian Manual/Hand Operated Vent Valve device for Turbo Pump V301 has a Viton O-ring included. Its has knurled surface for easy turn. The vent valve and vent device allow to avoid undesired venting of the pump. Agilent Varian Part Number V301MV.