These adapters fit the inlet of Edwards iQDP 40, QDP 40, DP 40, Semi Dry Pumps (no bolts included)Inlet Adapter for Edwards iQDP 40, QDP 40, DP 40, Semi Dry Pump ISO40 Bolted to NW40, Stainless Steel ISO40 bolted to NW40 Common Dimensions: A = 2.7"(69mm), B = 1.5"(40mm), C = 3.95"(100mm)

These adapters fit the inlet of Edwards iQDP 40, QDP 40, DP 40, Semi Dry Pumps (supplied with hardware to accomodate mounting to tapped as well as through holes)Inlet Adapter for Edwards iQDP 40 Semi Dry Pump ISO40 Bolted to NW50, Stainless Steel ISO40 bolted to NW50 Common Dimensions: A = 2"(50mm), B = 1.5"(41mm), C = 3.95"(100mm)

These adapters fit the inlet of Edwards iQDP 80, QDP 80, DP 80, Semi Dry Pumps (no bolts included)Inlet Adapter for Edwards iQDP 80, QDP 80, DP 80, Semi Dry Pump ISO63 Bolted to NW40, Stainless Steel ISO63 bolted to NW40 Common Dimensions: A = 2.75"(68mm), B = 1.5"(40mm), C = 5.25"(130mm)

These adapters fit the inlet of Edwards iQDP 80, QDP 80, DP 80, Semi Dry Pumps (no bolts included)Inlet Adapter for Edwards iQDP 80, QDP 80, DP 80, Semi Dry Pump ISO63 Bolted to NW50, Stainless Steel ISO63 bolted to NW50 Common Dimensions: A = 2"(50mm), B = 2"(50mm), C = 5.25"(130mm)

These bolts fit the ISO40 and ISO63 Adapters that fit on the inlet of iQDP, QDP, DP, 40/80 Series Edwards Dry PumpsBolt kit for Edwards ISO40 or ISO63 Inlet Adapters for Edwards iQDP, QDP, DP, 40/80 Series ISO63 bolted to NW40 Common Dimensions: A = 2"(50mm), B = 1.5"(40mm), C = 5.25"(130mm)

These single claw clamps follow International Standards Organization (ISO) standards and fit flange sizes of NW-63, NW-80, & NW-100 ISO flanged vacuum fittings are commonly used to build process vacuum plumbing and systems for industrial applications. They also can be used for Edwards Bolt Down Vacuum Pumps. The fittings are quick to assemble using single claw clamps and a centering ring (please see top right figure - click to enlarge). The Viton® centering ring contains a rubber/elastomeric o-ring. The ISO standard sizes for large flanges are NW-63, NW-80, NW-100, NW-160, NW-200, NW-250, NW-320, NW-400, NW-500, NW-630. These clamps are made of Stainless SteelSingle Claw Clamp, Fits ISO NW-63, NW-80, & NW-100 Vacuum Flanges, Stainless Steel

These intake O-rings fit the Edwards QDP-40 and iQDP-40 vacuum pumps. They fit in the intake O-ring groove in the intake below the bolt down ISO-40 fitting (49.5 mm ID x 3 mm CS, Viton).

This is the iQDP-80 Intake Apater Kit, Includes Viton O-Ring, Bolt down ISO-63 Ring and 4 bolt set. This is the Kit ONLY, Manifold and KF40 to ISO-63 Conical Reducer not included.

These intake O-rings fit the Edwards QDP-80 and iQDP-80 vacuum pumps. They fit in the intake O-ring groove in the intake below the bolt down ISO-63 fitting (3.1 ID in. x 0.21 in. CS, Viton). This is the Viton O-ring ONLY, manifold not included.

This is a KF 10/16 C-Clamp For Edwards Vacuum Pumps Rotary Vane Vacuum Pumps for the inlet intake port. To be used for fittings or accessories. They are made of corrosive resistant stainless steel and come with nuts, bolts and washers.

This is a C-Clamp for Edwards E1/2M40 or E1/2M80 Rotary Vane Vacuum Pumps for the outlet exhaust port. To be used for KF25 fittings or accessories. They are made of corrosive resistant stainless steel and come with nuts, bolts and washers.

This is a C-Clamp for Edwards E1/2M40 or E1/2M80 Rotary Vane Vacuum Pumps for the inlet intake port. To be used for KF40 fittings or accessories. They are made of corrosive resistant stainless steel and come with nuts, bolts and washers.