The MKS Granville Phillips 307 Vacuum Gauge Controller (VGC) measures pressures from 5 x 10 Torr (6.6 x 10 mbar or 6.6 x 10 Pa) to atmosphere, depending on (PCB) printed circuit board optional modules and transducers used. The New 307 (VGC) for sale in its simplest form as pictured runs two ionization gauges (IG) Glass Tubulated or Nude (NOT UHV) one ion gauge at a time, in the range of 2 X 10 Torr. It is a left mount, side by side with power supply for 19 inch rack and comes with AC Power Cord and Power Supply/Control Unit Power Cable. With OPTIONAL Modules the 307 Vacuum Gauge Controller can operate two ion gauges (IG) sequentially, along with two Convectron gauges (CG) or two thermocouple gauges (TC) simultaneously. Pressure readout is via 3 front panel displays, analog output, and available computer interface. The 307 (VGC) is a modular instrument which can be easily customized to fit most user's exact needs.

This is a MKS Granville Phillips Process Control Module and provides the 307 Vacuum Gauge Controller with single-pole, double-throw relays that may be controlled either by (2 digital setpoints) or by the built-in manual override switches. This Process Control Module has 2 user selectable channels. These 2 channels are assigned to the ion gauges. Switches are provided to assign channel 1 to IG1, IG2, or both; and likewise for channel 2. All two channels have selectable polarity for activation above or below the setpoint. For Process Control Card (module) installation procedures see pages 16-27 of instruction manual.pdf. For specs and procedures for use, see Chapter 5 of the instruction manual.

This is a RS-232 Computer Interface Card Module. The RS-232 Interface Module for the 307 Vacuum Gauge Controller allows data output to, and ion gauge control by, a host computer. Output is either by a command-response mechanism or by a talk-only mode which is invoked via a switch on the RS-232 board. A variety of baud rates and byte framing options are available, as well as switches to force the handshake lines to an “always true” condition. See Chapter 6 of .pdf manual for instructions on use. This is the RS-232 Computer Interface Card Module ONLY, MKS Granville Phillips 307 Controller, Cables and Accessories sold separately on this website. The MKS Granville Phillips 307 Vacuum Gauge Controller Instruction Manual can be downloaded below at DOWNLOADS:

This is a MKS Granville Phillips Dual Convectron Gauge PCB Printed Circuit Board Card (module) for MKS Granville Phillips 307 Vacuum Gauge Controller. Permits pressure measurements from 1 x 10 to 990 Torr (N2 equivalent) from two MKS Granville-Phillips Series 275 Convectron Gauges simultaneously. Two channel (A/B) modules allow for automatic turn-on and shut-off of ion gauges based on Convectron pressure. Also provides analog output of each indicated pressure. For Dual Convectron Card (module) installation procedures see page 17-26 of instruction manual. For specs, procedures for use and set up of the module, see Chapter 3 of the instruction manual. This is the Dual Convectron Card Module ONLY, MKS Granville Phillips 307 Controller, Cables and Accessories sold separately on this website.

This is a MKS Granville Phillips Linear Analog Output Module and provides three, zero to +10 Vdc, linearized voltages that correspond to the displayed pressure readings of the 307 Vacuum Gauge Controller. The source for these outputs is the digital data on the controller's internal bus to the Display Module. The analog output resolution is therefore dependent upon this data. The module is intended to be used in a 307 vacuum gauge controller configured with an ion gauge and two thermocouples. The pressure range for the IG linear output is selected by a front panel switch. Four separate ranges are available. For installation, specs and procedures for use, see Chapter 10 of the instruction manual.pdf.

This is a Remote Input Output Modue and provides Ion Gauge (IG) status outputs, remote filament on/off, degas on/off, front panel lockout capability, and fault or degas status indication relay. For installation of this user installed module see page 19 and for user instructions see page 27-29 of the 307 Vacuum Controller Instruction Manual.pdf below. This is the Remote Input Output Module ONLY, MKS Granville Phillips 307 Controller, Cables and Accessories sold separately on this website. The MKS Granville Phillips 307 Vacuum Gauge Controller Instruction Manual.pdf can be downloaded below at DOWNLOADS:

This is a MKS Granville Phillips Process Control Module provides the 307 Vacuum Gauge Controller with single-pole, double-throw relays that may be controlled either by (6 digital setpoints) or by the built-in manual override switches. This Process Control Module has 6 user selectable channels. The first 2 channels are assigned to the ion gauges. If present, channels 3 and 4 are assigned to CGA or TCA; and 5 and 6 to CGB, TCB, or CMB. Switches are provided to assign channel 1 to IG1, IG2, or both; and likewise for channel 2. All six channels have selectable polarity for activation above or below the setpoint. For Process Control Card (module) installation procedures see pages 16-27 of instruction manual.pdf. For specs and procedures for use, see Chapter 5 of the instruction manual.

MKS Granville Phillips Part Number: 307008 This is a MKS Granville Phillips 307 Vacuum Gauge Controller - Rack Mount Hardware - for 1 or 2 power supplies for 19 inch rack. This is the Hardware to mount 1 or 2 power supplies ONLY, MKS Granville Phillips 307 Controller, Cables and Accessories sold separately on this website. The MKS Granville Phillips 307 Vacuum Gauge Controller Instruction Manual.pdf can be downloaded below at DOWNLOADS: Other OPTIONAL Hardware: - User Installed Rack Mount Hardware for the MKS Granville Phillips 307 (VGC) available on this website are:Power Supply Cable & Control Unit Side by Side for 19 in. Rack - PN: 307009 Control Unit on the Left or Right Side for 19 in. Rack - PN: 307010

This is an IVP power cord (mains cable), 240 VAC, 2.5m long, special for Leybold TURBO.POWER 800 power supply. It has a 4 pin screw lock plug which connects to the Leybold TURBO.POWER 800 power supply on one end, and a US plug 5-15P on the other. This IVP power cord is for:Leybold TURBO.POWER 800 power supply

This is an IVP power cord (mains cable), 240 VAC, 2.5m long, special for the Edwards EPS 800 power supply. It has a 4 pin screw lock plug which connects to the Edwards EPS 800 power supply on one end, and a US plug 5-15P on the other. This IVP power cord is for:Edwards EPS 800 power supply

This is a Interconnect Cable to Feed Power to MKS Granville Phillips 307 Vacuum Gauge Controller Rack Mount. This is the Interconnect Cable/Power Cable ONLY, Cables and Accessories sold separately on this website. The MKS Granville Phillips 307 Vacuum Gauge Controller Instruction Manual.pdf can be downloaded at DOWNLOADS. Other OPTIONAL HardwareUser Installed Rack Mount Hardware for the MKS Granville Phillips 307 (VGC) available on this website are:Power Supply Cable & Control Unit Side by Side for 19 in. Rack - PN: 307009 Control Unit on the Left or Right Side for 19 in. Rack - PN: 307010 Control Unit in the Center of 19 in. Rack - PN: 307011 2 Control Units Side by Side for 19 in. Rack - PN: 307021

This is a MKS Granville Phillips 307 Vacuum Gauge Controller Rack Mounting plate kit that includes the interconnect cable (cable feeds power to MKS and Graville Phillips 307 vacuum gauge controllers) ,side by side plate panel and hardware for mounting the power supply and controller unit side by side for 19 inch rack. This is the Power Cable, side by side plate and hardware ONLY for mounting the Power Supply and Control Unit Side by Side, MKS Granville Phillips 307 Controller, Cables and Accessories sold separately on this website. The MKS Granville Phillips 307 Vacuum Gauge Controller Instruction Manual.pdf can be downloaded at DOWNLOADS: Other OPTIONAL Hardware:

This is a MKS Granville Phillips 307 or 350 Controller, Hardware, for Mounting Control Unit on Left or Right, 19 in. Rack. This is the Left or Right Plate, for mounting Control Unit ONLY, MKS Granville Phillips 307 or 350 Controller, Cables and Accessories sold separately on this website. The MKS Granville Phillips 307 Vacuum Gauge Controller Instruction Manual.pdf can be downloaded below at DOWNLOADS: Other OPTIONAL Hardware: - User Installed Rack Mount Hardware for the MKS Granville Phillips 307 (VGC) available on this website are:Power Supply Cable & Control Unit Side by Side for 19 in. Rack - PN: 307009 Control Unit on the Left or Right Side for 19 in. Rack - PN: 307010

This is a MKS Granville Phillips 307 or 350 Controller, Hardware, for Mounting Control Unit on Left or Right, 19 in. Rack. This is the Left or Right Plate, for mounting Control Unit ONLY, MKS Granville Phillips 307 or 350 Controller, Cables and Accessories sold separately on this website. The MKS Granville Phillips 307 Vacuum Gauge Controller Instruction Manual.pdf can be downloaded below at DOWNLOADS: Other OPTIONAL Hardware: - User Installed Rack Mount Hardware for the MKS Granville Phillips 307 (VGC) available on this website are:Power Supply Cable & Control Unit Side by Side for 19 in. Rack - PN: 307009 Control Unit on the Left or Right Side for 19 in. Rack - PN: 307010

This is a MKS Granville Phillips 307 or 350 Controller Hardware, for Mounting 2 Control Units Side-by-Side for 19 in. Rack. This is the panel plate and hardware, for mounting 2 Control Units ONLY, MKS Granville Phillips 307 or 350 Controller, Cables and Accessories sold separately on this website.The MKS Granville Phillips 307 Vacuum Gauge Controller Instruction Manual.pdf can be downloaded below at DOWNLOADS: Other OPTIONAL Hardware: - User Installed Rack Mount Hardware for the MKS Granville Phillips 307 (VGC) available on this website are:Power Supply Cable & Control Unit Side by Side for 19 in. Rack - PN: 307009 Control Unit on the Left or Right Side for 19 in. Rack - PN: 307010

This is a MKS Granville Phillips 307 Vacuum Gauge Controller, Hardware, for Mounting Power Supply in half rack panel. This is the panel plate and hardware, for mounting the Power Supply ONLY, MKS Granville Phillips 307 Controller, Cables and Accessories sold separately on this website. The MKS Granville Phillips 307 Vacuum Gauge Controller Instruction Manual.pdf can be downloaded below at DOWNLOADS: Other OPTIONAL Hardware: - User Installed Rack Mount Hardware for the MKS Granville Phillips 307 (VGC) available on this website are:Power Supply Cable & Control Unit Side by Side for 19 in. Rack - PN: 307009 Control Unit on the Left or Right Side for 19 in. Rack - PN: 307010