Skip to main content
× Home Products Downloads About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
cart
 
Login Icon
login

Keyword       Ideal Spectroscopy Part Number       Manufacturer Part Number

× Molecular-Spectroscopy Optical-Table-Accessories Absorption-Spectroscopy-Gas-Cells Ultra-High Purity Gas Products Pulse-Valves-For-Jet-Cooling Vacuum-Pressure-Measurement Fittings-and-Flanges Vacuum-Valves Vacuum-Pumps Modular-Vacuum-Chambers

Condition:
  New
Part Number:
  P103875
Warranty:
  Against Product Defect
Out of Stock  



$2,175.86


Print Version

Angle Water Cooled Trap, Inlet and Outlet NW50 KF50, Body size 4.50 inch OD


Angle Water Cooled Trap, Inlet and Outlet NW50 KF50, Body size 4.50 inch OD


Angle water cooled traps protect mechanical pumps and other downstream components from condensable process gasses and their by-products. They can extend or eliminate preventative maintenance intervals and pump overhauls. These unique water cooled traps have up to three coils of corrosion resistant 316L stainless steel tubing to provide a large cold surface area. Internal baffles combined with the coils create a perilous path for the gas flow, maximizing resident time and increasing contact between the gas and the coils. Depending on the application, house water or refrigerated water can be used to achieve the required temperature to cause by-products to pass from gas to solid phase. A 30 to 50 psi water supply is required. Anticipate a 1 gpm flow rate at 30 psi.

The two-piece trap body and 304 stainless steel construction allow these traps to be easily cleaned. Standard finish is beadblast. For proper sealing, apply a light coating of Krytox lube when cleaning or replacing the O-ring. Quick Disconnect (OPTIONAL) Fittings immediately shut off water flow from both directions for single handed, no-spill removal of the trap for preventative maintenance or O-ring replacement. Quick Disconnect water options are available just state while purchasing.

Features:

  • Two piece clamped body design
  • Water in and out tubes
  • Traps all condensable vapors
  • Stainless Steel type 304 construction, Viton O-Ring
  • Common Dimensions & Specs:
    A: 7.55"
    B: 5.28"
    C: 3.90"
    D: 6.05"
    E: 4.50"
    Port OD: 2.00"
    Quick Disconnect Water Option: Ask when purchasing
    Inlet & Outlet Flange Size: KF50



    Press ESC to Close


    PDF Logo IVP Technical Considerations for Selecting Vacuum Components for Chemical Processes.pdf



    You may wish to consider the following products:

    Ideal Vacuum Logo Water Mark
    CONTACT US
    Ideal Spectroscopy
    5910 Midway Park Blvd NE,
    Albuquerque, NM 87109-5805

    Phone: (505) 872-0037
    Fax: (505) 872-9001
    info@idealspectroscopy.com



    Press ESC to Close


    deepbox image 2