ITEM |
DESCRIPTION |
PART NO. |
1 |
Standard Cold Cap Assembly |
81437301 |
|
Water-cooled Halo Baffle |
K1857335 |
|
Cold Cap Connectors
Cold Cap Kit with Gasket | L88839301 |
Cold Cap Gasket/Grommet (Kit of 4) | L8839301 |
Cold Cap Nut & Follower (Brass) | L8840301 |
Cold Cap Female Coupling | 622445026 |
|
|
3 |
Jet Assembly |
F1971302 |
4 |
1 Butyl O-ring for ASA inlet flange |
78536001 |
5 |
Foreline Baffle Assembly |
F1744301 |
6 |
Centering ring for ISO foreline flange, 200K |
IC200SV |
7 |
Sight Glass Service Kit for Pumps Built Before Oct. 1995:
3 Glass Tubes | F1755008 |
2 Brass Union 1/4 OD x 1/4 MPT | 622568108 |
2 Brass Elbow 69FL 6x4, 169VL6-4 | 623451012 |
8 O-ring, Viton, Parker No. 2-011 | 660892011 |
8 O-ring, Viton, Parker No. 2-111 | 660892111 |
3 O-ring, Viton, Parker No. 2-221 | 660892221 |
3 O-ring, Viton, Parker No. 2-213 | 660892213 |
|
F6097301 |
7 |
Sight Glass Service Kit for Pumps Built After 1995 |
L9223001 |
8 |
Threaded Plugs, fill and drain |
77261001 |
|
Hose Barb 1/2in Hose to 3/8in Pipe |
624301111 |
9 |
Upper (water) Thermal Switch (Set at 200°F/93°C) |
K9050005 |
9 |
Lower (boiler) Thermal Switch (Set at 600°F/316°C) |
K9050006 |
10 |
Heater wire, 10 AWG, 196 inches (2 per heater required) |
X3900-68003 |
10b |
Heater Wiring Connection Box |
|
11 |
Heaters (six heaters required per pump, same voltage)
240V/415V/480V, 4000 watt Heater Element w/ leads | 647335010 |
200V, 4000 watt Heater Element | 647335020 |
400V, 4000 watt Heater Element w/ leads | L6383010 |
440V, 4000 watt Heater Element w/ leads | L6383011 |
| |
Heater Retrofit for pumps built bef. May 1990 |
240V/480V, 4000 watt Heater Element no leads | 647235248 |
| |
Kits (clamping plates not included) |
240V NHS-35 Diffusion Pump | L6391308 |
480V NHS-35 Diffusion Pump | L6391309 |
380/415V NHS-35 Diffusion Pump | L6391326 |
|
|
12 |
Heater Clampling Plate (Six required per pump) |
F1749001 |
13 |
Heater Insulator (One required per pump) |
L9699001 |
14 |
Cover Plate |
L9402001 |
|
Heat Shield (Reusable) |
L6370001 |
|
O-Ring Kit for ASA Pumps includes:
1 Butyl O-ring for ASA inlet flange | 78536001 |
1 Butly O-ring foreline flange (2-267) | 660893267 | |
8 Viton O-rings fill and drain (2-213) | 660892213 |
4 Viton O-rings fill and drain (2-221) | 660892221 |
1 Sight glass O-ring (2-240) | 660892240 |
1 Graphite sight glass gasket | L9228001 |
|
K0377169 |
|
DC-702 diffusion pump fluid, one-gallon |
695472008 |
|
DC-704 diffusion pump fluid, one-gallon |
695474008 |
|
DC-705 diffusion pump fluid, one-gallon |
695475008 |
|
Installation and Operation Manual-download from www.agilent.com/chem/vacuum |
699901140 |