This Ideal Vacuum bulkhead feedthrough has female HDMI connectors on either side. It is constructed of 304L stainless steel, has 1-14 UN x .95 thread and a Viton O-ring for a hermetic seal. This HDMI feedthrough requires a 1" diameter hole and the bulkhead can be up to 3/4" thick. Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. CF Conflat flanges are normally for processes requiring ultra high vacuum pressures, down to 10

Ideal Vacuum Hermetic HDMI feedthrough double-ended Jack CF2.75 flange. Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be connected to a CF vacuum flange. CF Conflat flanges are normally for processes requiring ultra high vacuum pressures, down to 10 Torr, and are vacuum sealed via nuts and bolts with copper gaskets. They come in sizes from 1.33 in. (mini conflat), 2.75, 4.5, 6, 8, 10, 12, 13.25, 14 and 16.5. inch O.D. Outer Diameter. KF or Quick Flange are for high vacuum pressures down to 10

Ideal Vacuum Hermetic HDMI Feedthrough double-ended Jack, NW40 Flange. Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough has a weldable tube (weld-on) to a KF vacuum flange. CF Conflat flanges are normally for processes requiring ultra high vacuum pressures, down to 10 Torr, and are vacuum sealed via nuts and bolts with copper gaskets. They come in sizes from 1.33 in. (mini conflat), 2.75, 4.5, 6, 8, 10, 12, 13.25, 14 and 16.5. inch O.D. Outer Diameter. KF or Quick Flange are for high vacuum pressures down to 10