This Swagelok® 1/16 in, 3-way Tee union connects three 1/16" OD tubes and is made of 316 stainless steel. Unions include nuts and ferrule sets. Nut threads are silver plated to prevent galling and seizing of the fitting when tightened. Tee Unions are used when three same-size bare tubing ends need to be joined. Unions are made with the nuts facing each other. These industry standard Swagelok compression-type fittings and components are precision manufactured and offer a gas-tight, metal-on-metal seal. They are available in standard fractional tubing sizes for making up stainless steel tubing. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination.

This Swagelok® 1/8 in, 3-way Tee union connects three 1/8" OD tubes and is made of 316 stainless steel. Unions include nuts and ferrule sets. Nut threads are silver plated to prevent galling and seizing of the fitting when tightened. Tee Unions are used when three same-size bare tubing ends need to be joined. Unions are made with the nuts facing each other. These industry standard Swagelok compression-type fittings and components are precision manufactured and offer a gas-tight, metal-on-metal seal. They are available in standard fractional tubing sizes for making up stainless steel tubing. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination.

This Swagelok® 3/16 in, 3-way Tee union connects three 3/16" OD tubes and is made of 316 stainless steel. Unions include nuts and ferrule sets. Nut threads are silver plated to prevent galling and seizing of the fitting when tightened. Tee Unions are used when three same-size bare tubing ends need to be joined. Unions are made with the nuts facing each other. These industry standard Swagelok compression-type fittings and components are precision manufactured and offer a gas-tight, metal-on-metal seal. They are available in standard fractional tubing sizes for making up stainless steel tubing. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination.

This Swagelok® 1/4 in, 3-way Tee union connects three 1/4" OD tubes and is made of 316 stainless steel. Unions include nuts and ferrule sets. Nut threads are silver plated to prevent galling and seizing of the fitting when tightened. Tee Unions are used when three same-size bare tubing ends need to be joined. Unions are made with the nuts facing each other. These industry standard Swagelok compression-type fittings and components are precision manufactured and offer a gas-tight, metal-on-metal seal. They are available in standard fractional tubing sizes for making up stainless steel tubing. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination.

This Swagelok® 3/8 in, 3-way Tee union connects three 3/8" OD tubes and is made of 316 stainless steel. Unions include nuts and ferrule sets. Nut threads are silver plated to prevent galling and seizing of the fitting when tightened. Tee Unions are used when three same-size bare tubing ends need to be joined. Unions are made with the nuts facing each other. These industry standard Swagelok compression-type fittings and components are precision manufactured and offer a gas-tight, metal-on-metal seal. They are available in standard fractional tubing sizes for making up stainless steel tubing. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination.

This Swagelok® 1/2 in, 3-way Tee union connects three 1/2" OD tubes and is made of 316 stainless steel. Unions include nuts and ferrule sets. Nut threads are silver plated to prevent galling and seizing of the fitting when tightened. Tee Unions are used when three same-size bare tubing ends need to be joined. Unions are made with the nuts facing each other. These industry standard Swagelok compression-type fittings and components are precision manufactured and offer a gas-tight, metal-on-metal seal. They are available in standard fractional tubing sizes for making up stainless steel tubing. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination.

This Swagelok® 3/4 in, 3-way Tee union connects three 3/4" OD tubes and is made of 316 stainless steel. Unions include nuts and ferrule sets. Nut threads are silver plated to prevent galling and seizing of the fitting when tightened. Tee Unions are used when three same-size bare tubing ends need to be joined. Unions are made with the nuts facing each other. These industry standard Swagelok compression-type fittings and components are precision manufactured and offer a gas-tight, metal-on-metal seal. They are available in standard fractional tubing sizes for making up stainless steel tubing. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination.

This Swagelok® 1 in, 3-way Tee union connects three 1" OD tubes and is made of 316 stainless steel. Unions include nuts and ferrule sets. Nut threads are silver plated to prevent galling and seizing of the fitting when tightened. Tee Unions are used when three same-size bare tubing ends need to be joined. Unions are made with the nuts facing each other. These industry standard Swagelok compression-type fittings and components are precision manufactured and offer a gas-tight, metal-on-metal seal. They are available in standard fractional tubing sizes for making up stainless steel tubing. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination.

This Swagelok® 3-way reducing Tee union connects one 1/4" OD tube to two 3/8" OD tubes. The 1/4" tubing connector is located on the center leg of the tee. The two 3/8" tubing connectors are on the ends of the long part of the tee. This 3-way reducing Tee union is made of stainless steel and includes nuts and ferrule sets. Nut threads are silver plated to prevent galling and seizing of the fitting when tightened. Reducing Tee Unions are used when three dissimilar-size bare tubing ends need to be joined. All unions are made with the nuts facing each other. These industry standard Swagelok compression-type fittings and components are precision manufactured and offer a gas-tight, metal-on-metal seal. They are available in standard fractional tubing sizes for making up stainless steel tubing. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination.

This Swagelok® 3-way reducing Tee union connects one 1/4" OD tube to two 1/2" OD tubes. The 1/4" tubing connector is located on the center leg of the tee. The two 1/2" tubing connectors are on the ends of the long part of the tee. This 3-way reducing Tee union is made of stainless steel and includes nuts and ferrule sets. Nut threads are silver plated to prevent galling and seizing of the fitting when tightened. Reducing Tee Unions are used when three dissimilar-size bare tubing ends need to be joined. All unions are made with the nuts facing each other. These industry standard Swagelok compression-type fittings and components are precision manufactured and offer a gas-tight, metal-on-metal seal. They are available in standard fractional tubing sizes for making up stainless steel tubing. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination.

This Swagelok® 3-way reducing Tee union connects one 3/8" OD tube to two 1/2" OD tubes. The 3/8" tubing connector is located on the center leg of the tee. The two 1/2" tubing connectors are on the ends of the long part of the tee. This 3-way reducing Tee union is made of stainless steel and includes nuts and ferrule sets. Nut threads are silver plated to prevent galling and seizing of the fitting when tightened. Reducing Tee Unions are used when three dissimilar-size bare tubing ends need to be joined. All unions are made with the nuts facing each other. These industry standard Swagelok compression-type fittings and components are precision manufactured and offer a gas-tight, metal-on-metal seal. They are available in standard fractional tubing sizes for making up stainless steel tubing. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination.

This Swagelok® 3-way reducing Tee union connects one 3/8" OD tube to two 3/4" OD tubes. The 3/8" tubing connector is located on the center leg of the tee. The two 3/4" tubing connectors are on the ends of the long part of the tee. This 3-way reducing Tee union is made of stainless steel and includes nuts and ferrule sets. Nut threads are silver plated to prevent galling and seizing of the fitting when tightened. Reducing Tee Unions are used when three dissimilar-size bare tubing ends need to be joined. All unions are made with the nuts facing each other. These industry standard Swagelok compression-type fittings and components are precision manufactured and offer a gas-tight, metal-on-metal seal. They are available in standard fractional tubing sizes for making up stainless steel tubing. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination.

This Swagelok® 3-way reducing Tee union connects one 1/2" OD tube to two 3/4" OD tubes. The 1/2" tubing connector is located on the center leg of the tee. The two 3/4" tubing connectors are on the ends of the long part of the tee. This 3-way reducing Tee union is made of stainless steel and includes nuts and ferrule sets. Nut threads are silver plated to prevent galling and seizing of the fitting when tightened. Reducing Tee Unions are used when three dissimilar-size bare tubing ends need to be joined. All unions are made with the nuts facing each other. These industry standard Swagelok compression-type fittings and components are precision manufactured and offer a gas-tight, metal-on-metal seal. They are available in standard fractional tubing sizes for making up stainless steel tubing. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination.

This Swagelok® 3-way reducing Tee union connects one 3/8" OD tube to two 1" OD tubes. The 3/8" tubing connector is located on the center leg of the tee. The two 1" tubing connectors are on the ends of the long part of the tee. This 3-way reducing Tee union is made of stainless steel and includes nuts and ferrule sets. Nut threads are silver plated to prevent galling and seizing of the fitting when tightened. Reducing Tee Unions are used when three dissimilar-size bare tubing ends need to be joined. All unions are made with the nuts facing each other. These industry standard Swagelok compression-type fittings and components are precision manufactured and offer a gas-tight, metal-on-metal seal. They are available in standard fractional tubing sizes for making up stainless steel tubing. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination.

This Swagelok® 3-way reducing Tee union connects one 1/2" OD tube to two 1" OD tubes. The 1/2" tubing connector is located on the center leg of the tee. The two 1" tubing connectors are on the ends of the long part of the tee. This 3-way reducing Tee union is made of stainless steel and includes nuts and ferrule sets. Nut threads are silver plated to prevent galling and seizing of the fitting when tightened. Reducing Tee Unions are used when three dissimilar-size bare tubing ends need to be joined. All unions are made with the nuts facing each other. These industry standard Swagelok compression-type fittings and components are precision manufactured and offer a gas-tight, metal-on-metal seal. They are available in standard fractional tubing sizes for making up stainless steel tubing. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination.

This Swagelok® 3-way reducing Tee union connects one 3/4" OD tube to two 1" OD tubes. The 3/4" tubing connector is located on the center leg of the tee. The two 1" tubing connectors are on the ends of the long part of the tee. This 3-way reducing Tee union is made of stainless steel and includes nuts and ferrule sets. Nut threads are silver plated to prevent galling and seizing of the fitting when tightened. Reducing Tee Unions are used when three dissimilar-size bare tubing ends need to be joined. All unions are made with the nuts facing each other. These industry standard Swagelok compression-type fittings and components are precision manufactured and offer a gas-tight, metal-on-metal seal. They are available in standard fractional tubing sizes for making up stainless steel tubing. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination.