Pfeiffer Part Number: PM 061 187-X. This Pfeiffer main power input cable connects a HiPace 1200 turbo pump directly to a 115 VAC single phase electrical source. The HiPace 1200 turbo pump has a Hastings HAN 3 type plug built into it. This 3 meter long cable has a mating HAN 3 connector one one end, and a standard NEMA 5-15P plug on the other. This power cable supplies power to the pump's integrated TC 1200 drive unit and to an (optional) OmniControl 001 controller (part number P1012626). This Pfeiffer mains input power cable for the HiPace 1200 turbo pump has part number PM 061 187-X.

This input power supply power cord (mains cable) is used on Pfeiffer OmniControl 200, 300, 400, and DCU 110 controllers, HiScroll dry scroll roughing/backing pumps, and with other Pfeiffer products. These power cords have a standard NEMA 5-15P 115 VAC plug one one end and an IEC320 C13 female socket connector on the other. This cable is 3 meters long (10 ft.) and has 18 gauge wire and 3 conductors (18/3).

Pfeiffer Part Number: P 4564 309 HB. This Pfeiffer main power input cable connects a HiPace 1200 turbo pump directly to a 208 VAC single phase electrical source. The HiPace 1200 turbo pump has a Hastings HAN 3 type plug built into it. This 3 meter long cable has a mating HAN 3 connector one one end, and a standard NEMA 6-15P plug on the other. This power cable supplies power to the pump's integrated TC 1200 drive unit and to an (optional) OmniControl 001 controller (part number P1012626). This Pfeiffer mains input power cable for the HiPace 1200 turbo pump has part number PM 061 187-X.

This 3 meter long cable, with 9-Pin D-sub connector on one end and M12 socket connector on the other, connects select DigiLine gauges to DPG109 or HiPace TCs in specific configurations: A) Connect Pfeiffer DigiLine Gauges with M12 Socket to a Pfeiffer DPG109 or, B) Connect Pfeiffer DigiLine Gauges with 9 pin D-Sub to Pfeiffer HiPace TC This listing is only for the Pfeiffer cable and end connectors only, as illustrated. All Pfeiffer controllers and gauges sold separately on this website. Operating instructions and specifications may be available within the downloadable PDF.

Pfeiffer Part Number: PM 061 352-T. This Pfeiffer power connection cable connects a HiPace turbo pump with integrated TC 400 or TM 700 electronic drive unit to an OmniControl 400 controller. The OmniControl 400 supplies power to the turbo pump through this cable. This cable is used on HiPace 300, 350, 450, 700, and 800 turbo pumps. This is 3 meter long cable pump power cable has 3 conductors and allows the OmniControl 400 to be rack mounted or located on a bench top, remote from the pump. This Pfeiffer TC 400 turbo pump drive unit or Pfeiffer TM 700 turbo pump drive unit to OmniControl 400 power connection cable has part number PM 061 352-T. This Pfeiffer turbo pump power cable connects:

This Turbo Pump-to-Controller cable connects the Pfeiffer Balzers TPH/U 050, 060, 062, 100, 110, 170, 190, 240, 260, 330, 510, 520 turbomolecular vacuum pump to the TCP-040, TCP-120, TCP-121, TCP-300, TCP-310, TCP-380, TCP-600 and other controllers. This cable is used for many models of Pfeifer Balzers turbo pumps.

This Pfeiffer Balzers connect can be used to make an AC input cable for the Pfeiffer TCP-040, TCP-270, TCP-300, TCP-305, and TCP-310 turbo pump controllers. You must solder on an AC power cord blank to use this connector. The instructions for making some connection are shown above.

This is a 110VAC Power Cable for Pfeiffer Balzer Controllers TCP120, TCP121, TCP380.

This 3 meter long cable supplies power from a Pfeiffer OmniControl 200 or DCU-110 turbo pump controller to the integrated TC 110 electronic drive unit on Pfeiffer HiPace 80 and HiPace 300H turbo pumps. A 15-pin D-Sub connector on one end of the cable plugs into the TC 110 drive unit. The D-Sub connector splits out into two cables: The 3 meter long, heavy 3 conductor cable connects to the OmniControl 200 or DCU 110 unit and supplies 24 VDC power to the TC 110 and pump. The short cable emanating from the D-Sub connector is for communications. This short cable is extended with a 3 meter long RS485 extension cable (part number P1012287) which then connects to the OmniControl 200 or DCU-110 controller, allowing it to manage all main parameters and functions of the turbo pump.

This 3 meter long cable supplies power from a Pfeiffer OmniControl 200 or DCU-110 turbo pump controller to the integrated TC 110 electronic drive unit on Pfeiffer HiPace 80 and HiPace 300H turbo pumps. A 15-pin D-Sub connector on one end of the cable plugs into the TC 110 drive unit. The D-Sub connector splits out into two cables: The 3 meter long, heavy 3 conductor cable connects to the OmniControl 200 or DCU 110 unit and supplies 24 VDC power to the TC 110 and pump. The short cable emanating from the D-Sub connector is for communications. This short cable is extended with a 3 meter long RS485 extension cable (part number P1012287) which then connects to the OmniControl 200 or DCU-110 controller, allowing it to manage all main parameters and functions of the turbo pump.

This special serial cable allows RS485 communications between a Pfeiffer HiPace turbo pump TC drive unit and a Pfeiffer OmniControl or DCU controller. This interface cable has 4-pin, M12, round screw-type connectors on both ends. This cable is 3 meters long (10 ft.) and meets or exceeds OEM specs (OEM PN: PM 061 283-T3). On TC 110 drive units, which have a 15-pin D-Sub (X3) connector, a power and communications adapter cable (part number P103335 or P1011168) is used to split out the X3 connector into a pump power cable and a short RS485 communication cable (terminated with an M12 connector). This 3 meter long RS485 cable attaches to and extends that short cable. The other end of this cable connects to the M12 round connector on an OmniControl or a DCU controller.

This special serial cable allows RS485 communications between a Pfeiffer HiPace turbo pump TC drive unit and a Pfeiffer OmniControl or DCU controller. This interface cable has 4-pin, M12, round screw-type connectors on both ends. This cable is 10 meters long (10 ft.) and meets or exceeds OEM specs (OEM PN: PM 061 285 -T). On TC 110 drive units, which have a 15-pin D-Sub (X3) connector, a power and communications adapter cable (part number P103335 or P1011168) is used to split out the X3 connector into a pump power cable and a short RS485 communication cable (terminated with an M12 connector). This 10 meter long RS485 cable attaches to and extends that short cable. The other end of this cable connects to the M12 round connector on an OmniControl or a DCU controller.