Ideal Vacuum Hermetic USB 3.0 high speed Feedthrough, stainless steel double-ended connector seal, CF 2.75 Flange. Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be connected with a CF vacuum flange to the vacuum chamber. CF Conflat flanges are normally for processes requiring ultra high vacuum pressures, down to 10 Torr, and are vacuum sealed via nuts and bolts with copper gaskets. They come in sizes from 1.33 in. (mini conflat), 2.75, 4.5, 6, 8, 10, 12, 13.25, 14 and 16.5. inch O.D. Outer Diameter. KF or Quick Flange are for high vacuum pressures down to 10

Ideal Vacuum Hermetic Ethernet feedthrough double-ended jack, CF2.75 Flange. Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be connected to a CF vacuum flange. CF Conflat flanges are normally for processes requiring ultra high vacuum pressures, down to 10 Torr, and are vacuum sealed via nuts and bolts with copper gaskets. They come in sizes from 1.33 in. (mini conflat), 2.75, 4.5, 6, 8, 10, 12, 13.25, 14 and 16.5. inch O.D. Outer Diameter. KF or Quick Flange are for high vacuum pressures down to 10

This Ideal Vacuum ethernet bulkhead double-ended feedthrough is constructed of stainless steel, has a 1-14 UN x .95 thread, and a Viton O-ring for an hermetic seal. This ehtrenet feedthrough requires a 1" hole and can have a bulkhead up to 3/4" thick. Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. CF Conflat flanges are normally for processes requiring ultra high vacuum pressures, down to 10

Ideal Vacuum USB Feedthrough Double-Ended, 2.16 Conflat Flange is UHV Compatible. Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be connected to a KF vacuum flange. CF Conflat flanges are normally for processes requiring ultra high vacuum pressures, down to 10 Torr, and are vacuum sealed via nuts and bolts with copper gaskets. They come in sizes from 1.33 in. (mini conflat), 2.75, 4.5, 6, 8, 10, 12, 13.25, 14 and 16.5. inch O.D. Outer Diameter. KF or Quick Flange are for high vacuum pressures down to 10

Ideal Vacuum USB Feedthrough Double-Ended, ISO KF 40 Flange Without Plugs. Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be connected to a KF vacuum flange. CF Conflat flanges are normally for processes requiring ultra high vacuum pressures, down to 10-12 Torr, and are vacuum sealed via nuts and bolts with copper gaskets. They come in sizes from 1.33 in. (mini conflat), 2.75, 4.5, 6, 8, 10, 12, 13.25, 14 and 16.5. inch O.D. Outer Diameter.

Ideal Vacuum USB Feedthrough Single-Ended, CF1.33 Conflat Flange With Vacuum Plug Grounded Shield is UHV Compatible. Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be connected to a CF vacuum flange. CF Conflat flanges are normally for processes requiring ultra high vacuum pressures, down to 10 Torr, and are vacuum sealed via nuts and bolts with copper gaskets. They come in sizes from 1.33 in. (mini conflat), 2.75, 4.5, 6, 8, 10, 12, 13.25, 14 and 16.5. inch O.D. Outer Diameter. KF or Quick Flange are for high vacuum pressures down to 10

This Ideal Vacuum bulkhead feedthrough has female HDMI connectors on either side. It is constructed of 304L stainless steel, has 1-14 UN x .95 thread and a Viton O-ring for a hermetic seal. This HDMI feedthrough requires a 1" diameter hole and the bulkhead can be up to 3/4" thick. Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. CF Conflat flanges are normally for processes requiring ultra high vacuum pressures, down to 10

Ideal Vacuum USB Feedthrough Double-Ended, KF25 Flange is UHV Compatible. Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be connected to a KF vacuum flange. CF Conflat flanges are normally for processes requiring ultra high vacuum pressures, down to 10 Torr, and are vacuum sealed via nuts and bolts with copper gaskets. They come in sizes from 1.33 in. (mini conflat), 2.75, 4.5, 6, 8, 10, 12, 13.25, 14 and 16.5. inch O.D. Outer Diameter. KF or Quick Flange are for high vacuum pressures down to 10

Ideal Vacuum USB Feedthrough Double-Ended, weld in adapter is Grounded Shield, UHV Compatible. Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be weldable (weld-on) to any vacuum flange of your needs. CF Conflat flanges are normally for processes requiring ultra high vacuum pressures, down to 10 Torr, and are vacuum sealed via nuts and bolts with copper gaskets. They come in sizes from 1.33 in. (mini conflat), 2.75, 4.5, 6, 8, 10, 12, 13.25, 14 and 16.5. inch O.D. Outer Diameter. KF or Quick Flange are for high vacuum pressures down to 10

Ideal Vacuum Hermetic USB 3.0 high speed Feedthrough, stainless steel double-ended connector seal, KF25 Flange. Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough has a weldable tube (weld-on) to a KF vacuum flange. CF Conflat flanges are normally for processes requiring ultra high vacuum pressures, down to 10 Torr, and are vacuum sealed via nuts and bolts with copper gaskets. They come in sizes from 1.33 in. (mini conflat), 2.75, 4.5, 6, 8, 10, 12, 13.25, 14 and 16.5. inch O.D. Outer Diameter. KF or Quick Flange are for high vacuum pressures down to 10

Ideal Vacuum USB Feedthrough, 1 Pin, Double-Ended, ISO KF50 Quick Flange is Instrumentation Feedthrough for USB Connection, Grounded Shield, UHV Compatible. Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be connected to a KF vacuum flange. CF Conflat flanges are normally for processes requiring ultra high vacuum pressures, down to 10 Torr, and are vacuum sealed via nuts and bolts with copper gaskets. They come in sizes from 1.33 in. (mini conflat), 2.75, 4.5, 6, 8, 10, 12, 13.25, 14 and 16.5. inch O.D. Outer Diameter. KF or Quick Flange are for high vacuum pressures down to 10

Ideal Vacuum USB Feedthrough, 1 Pin, Double-Ended, 2.75 Conflat Flange is an Instrumentation Feedthrough for USB Connection, Grounded Shield and UHV Compatible. Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be weldable (weld-on) to any vacuum flange of your needs. CF Conflat flanges are normally for processes requiring ultra high vacuum pressures, down to 10

Ideal Vacuum Feedthroughs, USB Feedthrough, 1 Pin, Double-Ended, 2.75 Conflat Flange, Instrumentation Feedthrough for USB Connection, Grounded Shield, UHV Compatible. Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be connected to a CF vacuum flange. CF Conflat flanges are normally for processes requiring ultra high vacuum pressures, down to 10 Torr, and are vacuum sealed via nuts and bolts with copper gaskets. They come in sizes from 1.33 in. (mini conflat), 2.75, 4.5, 6, 8, 10, 12, 13.25, 14 and 16.5. inch O.D. Outer Diameter. KF or Quick Flange are for high vacuum pressures down to 10

Ideal Vacuum Hermetic Ethernet feedthrough double-ended Jack with KF40 flange. Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough has a weldable tube (weld-on) to a KF vacuum flange. CF Conflat flanges are normally for processes requiring ultra high vacuum pressures, down to 10 Torr, and are vacuum sealed via nuts and bolts with copper gaskets. They come in sizes from 1.33 in. (mini conflat), 2.75, 4.5, 6, 8, 10, 12, 13.25, 14 and 16.5. inch O.D. Outer Diameter. KF or Quick Flange are for high vacuum pressures down to 10

This Ideal Vacuum Bulkhead Feedthrough has female USB 3.0 Type A high speed connectors on either side. It is constructed of 304L stainless steel with a 1-14UN x .95 thread. This USB 3.0 high speed feedthrough requires a 1" hole and the bulkhead can be up to 3/4" thick. A Viton O-ring makes an hermetic seal. Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. CF Conflat flanges are normally for processes requiring ultra high vacuum pressures, down to 10

Ideal Vacuum Hermetic USB 3.0 high speed Feedthrough, stainless steel double-ended connector seal, KF40 Flange. Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough has a weldable tube (weld-on) to a KF vacuum flange. CF Conflat flanges are normally for processes requiring ultra high vacuum pressures, down to 10 Torr, and are vacuum sealed via nuts and bolts with copper gaskets. They come in sizes from 1.33 in. (mini conflat), 2.75, 4.5, 6, 8, 10, 12, 13.25, 14 and 16.5. inch O.D. Outer Diameter. KF or Quick Flange are for high vacuum pressures down to 10

Ideal Vacuum Hermetic HDMI feedthrough double-ended Jack CF2.75 flange. Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be connected to a CF vacuum flange. CF Conflat flanges are normally for processes requiring ultra high vacuum pressures, down to 10 Torr, and are vacuum sealed via nuts and bolts with copper gaskets. They come in sizes from 1.33 in. (mini conflat), 2.75, 4.5, 6, 8, 10, 12, 13.25, 14 and 16.5. inch O.D. Outer Diameter. KF or Quick Flange are for high vacuum pressures down to 10

Ideal Vacuum Hermetic HDMI Feedthrough double-ended Jack, NW40 Flange. Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough has a weldable tube (weld-on) to a KF vacuum flange. CF Conflat flanges are normally for processes requiring ultra high vacuum pressures, down to 10 Torr, and are vacuum sealed via nuts and bolts with copper gaskets. They come in sizes from 1.33 in. (mini conflat), 2.75, 4.5, 6, 8, 10, 12, 13.25, 14 and 16.5. inch O.D. Outer Diameter. KF or Quick Flange are for high vacuum pressures down to 10

Ideal Vacuum USB Feedthrough Double-Ended, CF 2.75 Conflat Flange is an Instrumentation Feedthrough for USB Connection, Grounded Shield, UHV Compatible. Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be connected with to a CF vacuum flange. CF Conflat flanges are normally for processes requiring ultra high vacuum pressures, down to 10 Torr, and are vacuum sealed via nuts and bolts with copper gaskets. They come in sizes from 1.33 in. (mini conflat), 2.75, 4.5, 6, 8, 10, 12, 13.25, 14 and 16.5. inch O.D. Outer Diameter. KF or Quick Flange are for high vacuum pressures down to 10

Ideal Vacuum USB Feedthrough, Type A Male Feedthrough, 1.33 Conflat Flange is Instrumentation Feedthrough for USB Connection, Grounded Shield, UHV Compatible. Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be connected to a CF vacuum flange. CF Conflat flanges are normally for processes requiring ultra high vacuum pressures, down to 10 Torr, and are vacuum sealed via nuts and bolts with copper gaskets. They come in sizes from 1.33 in. (mini conflat), 2.75, 4.5, 6, 8, 10, 12, 13.25, 14 and 16.5. inch O.D. Outer Diameter. KF or Quick Flange are for high vacuum pressures down to 10

Ideal Vacuum USB Feedthrough Double-Ended, CF 1.33 Conflat Flange is an Instrumentation Feedthrough for USB Connection, Grounded Shield, UHV Compatible. Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be connected to a CF vacuum flange. CF Conflat flanges are normally for processes requiring ultra high vacuum pressures, down to 10 Torr, and are vacuum sealed via nuts and bolts with copper gaskets. They come in sizes from 1.33 in. (mini conflat), 2.75, 4.5, 6, 8, 10, 12, 13.25, 14 and 16.5. inch O.D. Outer Diameter. KF or Quick Flange are for high vacuum pressures down to 10

These rugged feedthroughs are UHV rated and bakeable to 450° C and have a 1.33 in. CF diameter stainless steel insulated sub-assembly with 0.056 in. diameter pins. Features Include: Common Dimensions: A = 5.55", B = 2.93", C = 1.33" Feedthrough Diameter: 1.33" CF Material: Stainless Steel, Alumel Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be weldable (weld-on) or connected with a CF, KF or ISO vacuum flange to the vacuum chamber.

These rugged feedthroughs are UHV rated and bakeable to 450° C and have a 1.33 in. CF diameter stainless steel insulated sub-assembly with 0.062 in. diameter pins. Features Include: Common Dimensions: A = 5.55", B = 2.93", C = 1.33" Feedthrough Diameter: 1.33" CF Material: Stainless Steel, Alumel Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be weldable (weld-on) or connected with a CF, KF or ISO vacuum flange to the vacuum chamber.

These rugged feedthroughs are UHV rated and bakeable to 450° C and have a 2.75 in. CF diameter stainless steel insulated sub-assembly. Features Include: Common Dimensions: A = 5.55", B = 2.48", C = 2.75" Feedthrough Diameter: 2.75" CF Material: Stainless Steel, Alumel Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be weldable (weld-on) or connected with a CF, KF or ISO vacuum flange to the vacuum chamber.

These rugged Ideal Vacuum Feedthroughs are UHV rated and bakeable to 450° C and have a 2.75 in. CF diameter stainless steel insulated sub-assembly. Type K: Alumel conductors have a negative polarity (magnetic) and the vacuum side ends are flat. Chromel conductors have a positive polarity (non - magnetic) and the vacuum side ends have a radius Features Include: Common Dimensions: A = 5.6" B = 2.50" C = 2.75" Pin Diameter: 0.056±.002 Fitting: 2.75" CFMaterial: Stainless Steel, Alumel Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be weldable (weld-on) or connected with a CF, KF or ISO vacuum flange to the vacuum chamber.

This air-side keyed, push-on circular connector features 10 female receivers accepting 10 amps per pin in either 0.056 in. or 0.062 in. diameter. Maximum 700 V total. Overall diameter is 1.3 in. Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be weldable (weld-on) or connected with a CF, KF or ISO vacuum flange to the vacuum chamber. CF Conflat flanges are normally for processes requiring ultra high vacuum pressures, down to 10-12 Torr, and are vacuum sealed via nuts and bolts with copper gaskets. They come in sizes from 1.33 in. (mini conflat), 2.75, 4.5, 6, 8, 10, 12, 13.25, 14 and 16.5. inch O.D. Outer Diameter.

This power feedthrough is a 1.33 in. CF type vacuum flanged fitting. It is a nickel electrical feedthrough and conveys high-voltage, high-amperage power into high-vacuum environments for operating heating coils in sputtering, coating and other demanding material evaporation applications or experiments. These rugged 1.33 in. nickel power feedthroughs are UHV rated, and are bakeable to 450° C. Features Include: Common Dimensions: A = 7.22", B = 2.02", C = 1.33" Feedthrough Diameter: 1.33" CF Material: Stainless Steel, Nickel Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be weldable (weld-on) or connected with a CF, KF or ISO vacuum flange to the vacuum chamber.

This power feedthrough is a 1.33 in. CF type vacuum flanged fitting. It is a copper electrical feedthrough and conveys high-voltage, high-amperage power into high-vacuum environments for operating heating coils in sputtering, coating and other demanding material evaporation applications or experiments. These rugged 1.33 in. CF copper power feedthroughs are UHV rated, and are bakeable to 450° C. Features Include: Common Dimensions: A = 7.22", B = 2.02", C = 1.33" Feedthrough Diameter: 1.33" CF Material: Stainless Steel, Copper Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be weldable (weld-on) or connected with a CF, KF or ISO vacuum flange to the vacuum chamber.

This power feedthrough is a 1.33 in. CF type vacuum flanged fitting. It is a nickel electrical feedthrough and conveys high-voltage, high-amperage power into high-vacuum environments for operating heating coils in sputtering, coating and other demanding material evaporation applications or experiments. These rugged 1.33 in. nickel power feedthroughs are UHV rated, and are bakeable to 450° C. Features Include: Common Dimensions: A = 7.27", B = 2.67", C = 1.33" Feedthrough Diameter: 1.33" CF Material: Stainless Steel, Nickel Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be weldable (weld-on) or connected with a CF, KF or ISO vacuum flange to the vacuum chamber.

This power feedthrough is a 2.75 in. CF type vacuum flanged fitting. It is a nickel electrical feedthrough and conveys high-voltage, high-amperage power into high-vacuum environments for operating heating coils in sputtering, coating and other demanding material evaporation applications or experiments. These rugged 2.75 in. nickel power feedthroughs are UHV rated, and are bakeable to 450° C. Features Include: Common Dimensions: A = 7.27", B = 3.17", C = 2.75" Feedthrough Diameter: 2.75" CF Material: Stainless Steel, Nickel Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be weldable (weld-on) or connected with a CF, KF or ISO vacuum flange to the vacuum chamber.

This power feedthrough is a 1.33 in. CF type vacuum flanged fitting. It is a copper electrical feedthrough and conveys high-voltage, high-amperage power into high-vacuum environments for operating heating coils in sputtering, coating and other demanding material evaporation applications or experiments. These rugged 1.33 in. CF copper power feedthroughs are UHV rated, and are bakeable to 450° C. Features Include: Common Dimensions: A = 7.27", B = 2.67", C = 1.33" Feedthrough Diameter: 1.33" CF Material: Stainless Steel, Copper Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be weldable (weld-on) or connected with a CF, KF or ISO vacuum flange to the vacuum chamber.

This power feedthrough is a 2.75 in. CF type vacuum flanged fitting. It is a copper electrical feedthrough and conveys high-voltage, high-amperage power into high-vacuum environments for operating heating coils in sputtering, coating and other demanding material evaporation applications or experiments. These rugged 2.75 in. copper power feedthroughs are UHV rated, and are bakeable to 450° C. Features Include: Common Dimensions: A = 7.27", B = 3.17", C = 2.75" Feedthrough Diameter: 2.75" CF Material: Stainless Steel, Copper Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be weldable (weld-on) or connected with a CF, KF or ISO vacuum flange to the vacuum chamber.