This is a 24 x 24 x 24 inch bare Ideal Vacuum Cube frame with door. The frame and door are constructed of 304L stainless steel. Each frame side is machined from a single stainless steel plate. The machined frame plates are welded together to form the completed frame. One side of the frame has a hinged stainless steel door with an opening of 21” x 21” and seals with an O-ring. After welding is complete and the door installed, the frame is fully leak tested.
The other five frame sides accept twenty 12” x 12” Cube plates (four per side). Plates are mounted to the frame with 1/4"-20 stainless steel screws. Once all plates are installed, the chamber is complete. The door eliminates the need for individual fastener removal, allowing interior access in seconds.
The plates can be removed, replaced, or reused as needed to reconfigure the chamber to new requirements.
This frame allows a user to build a 24 x 24 x 24 inch modular Cube chamber from scratch. Please see our other listings for 24 x 24 x 24 in. preconfigured chamber development kits and for a large variety of 12 x 12 inch Cube plates.
Please download the Cube plate installation manual for installation instructions.
A complete 24 x 24 x 24 chamber requires:
- 24 x 24 x 24 stainless steel frame with door
- Twenty Cube plates
- 24 x 24 x 24 Cube hardware kit (P1013728)
- Optional accessories including feet, viewing windows and doors, thermal, and optical plates
Please download the Cube plate installation manual for installation instructions.
Use the Cube plate maintenance and service toolkit
(P1010554) to assemble a Cube.
