|
| Flexible KF-25 Vacuum Pump Exhaust Hose, Do It Yourself, 2 each KF-25, 10 ft Hose, & PVC Cement Kit |
|
|
 |
|
|
Flexible KF-25 Vacuum Pump Exhaust Hose, Do It Yourself, 2 each KF-25 Adapters, 10 ft Hose, & PVC Cement Kit
Customer Assembly Required, Hose Must Be Cut To Length, KF-25 Adpater Solvent Weld Required.
Our do-it-yourself (DIY) PVC flexible hose kits are a perfect economical solution when constructing a vacuum pump exhaust line. They are an economical way to connect a vacuum pumps exhaust to a KF flanged fume hood or exhaust manifold system. Customer assembly is required; the hose is shipped in a 10-foot section which can easily be cut to the desired length, two each KF-25 Schedule 80 Polyvinyl Chloride (PVC) hose adapters are included, along with a PVC cement and primer kit. These PVC hose kits are not recommended for use as a vacuum intake line for roughing pump applications where pressure is lower than 1 Torr. Customer assembly required (customer must trim the hose to their desired length and install the PVC to KF adapter flanges using the supplied solvent weld kit). Additional KF to PVC hose adapters are shown in the optional accessories below.
Kit Includes:
- 10 Foot Length Of Hose, Size OD: 0.75 inch
- PVC Cement and Primer Installation Kit.
- Two Each KF-25 Flanges: Polyvinl Chloride PVC
|
|
|
|
 |
|
| Product: |
Flexible KF-25 Vacuum Pump Exhaust Hose, Do It Yourself, 2 each KF-25, 10 ft Hose, & PVC Cement Kit |
| Condition: |
New |
| Warranty: |
Against Product Defect |
| Part Number: |
P107328 |
| Price: |
$166.12 |
|
|
|
|
