This Pfeiffer venting valve for HiPace 80 Neo turbo pumps with a TC 80 drive unit screws into the G 1/8" (BSPP) vent port of the pump (sealing ring included). It ensures the controlled, automatic venting of the turbo pump after shutting down or in the event of a power failure, and limits an uncontrollable pressure rise rate in excess of the permissable maximum (15 hPa/s), thus preventing possible damage to the pump's rotor and magnetic bearing.

Intelligent accessories for connection to AccessLink accessory ports Venting mode, venting time and venting period adjustable via electronic drive unit Connection: G 1/8" Valve is normally closed Can be directly connected to accessory outputs C1 or D1 with AccessLink

This valve has an M8 electical connector that plugs into one of the accessory ports in the TC 110-to-controller cable (part number P103335 or P1011168, sold separately). The TC 110 drive unit controls and supplies power to the valve. The activation (control) of this valve for the venting connection is user configured and supported by Pfeiffer controllers (OmniControl 200 or TC 80) or externally via RS485. This Pfeiffer venting valve for HiPace 80 Neo turbo pumps with integrated TC 80 drive unit has part number PM Z01 295