These vacuum compatible aluminum optical breadboards are the perfect low-cost solution when building optical subassemblies that require a vacuum environment. They are 1/4"-20 tapped on a 1" standard optical table breadboard pattern (the first row of holes are 0.5 inches from the edge). They have five counterbored holes, one on each corner inset 1" from the edge and one in the center, which are used with 1/4" socket head cap screws to provide a smooth top surface when mounting the breadboard to a table or adding pedestals as feet. The flatness is specified as 0.006" over 1 ft These breadboards can be used inside a vacuum chamber system due to the lack of an anodized coating, down to 10

These vacuum compatible aluminum optical breadboards are the perfect low-cost solution when building optical subassemblies that require a vacuum environment. They are 1/4"-20 tapped on a 1" standard optical table breadboard pattern (the first row of holes are 0.5 inches from the edge). They have five counterbored holes, one on each corner inset 1" from the edge and one in the center, which are used with 1/4" socket head cap screws to provide a smooth top surface when mounting the breadboard to a table or adding pedestals as feet. The flatness is specified as 0.006" over 1 ft These breadboards can be used inside a vacuum chamber system due to the lack of an anodized coating, down to 10

These vacuum compatible aluminum optical breadboards are the perfect low-cost solution when building optical subassemblies that require a vacuum environment. They are 1/4"-20 tapped on a 1" standard optical table breadboard pattern (the first row of holes are 0.5 inches from the edge). They have five counterbored holes, one on each corner inset 1" from the edge and one in the center, which are used with 1/4" socket head cap screws to provide a smooth top surface when mounting the breadboard to a table or adding pedestals as feet. The flatness is specified as 0.006" over 1 ft These breadboards can be used inside a vacuum chamber system due to the lack of an anodized coating, down to 10

These vacuum compatible aluminum optical breadboards are the perfect low-cost solution when building optical subassemblies that require a vacuum environment. They are 1/4"-20 tapped on a 1" standard optical table breadboard pattern (the first row of holes are 0.5 inches from the edge). They have five counterbored holes, one on each corner inset 1" from the edge and one in the center, which are used with 1/4" socket head cap screws to provide a smooth top surface when mounting the breadboard to a table or adding pedestals as feet. The flatness is specified as 0.006" over 1 ft These breadboards can be used inside a vacuum chamber system due to the lack of an anodized coating, down to 10

These vacuum compatible aluminum optical breadboards are the perfect low-cost solution when building optical subassemblies that require a vacuum environment. They are 1/4"-20 tapped on a 1" standard optical table breadboard pattern (the first row of holes are 0.5 inches from the edge). They have five counterbored holes, one on each corner inset 1" from the edge and one in the center, which are used with 1/4" socket head cap screws to provide a smooth top surface when mounting the breadboard to a table or adding pedestals as feet. The flatness is specified as 0.006" over 1 ft These breadboards can be used inside a vacuum chamber system due to the lack of an anodized coating, down to 10

These optical breadboard to vacuum cube adapter rails enable optical breadboards to be mounted to the exterior of a vacuum cube plate. Allowing for custom experimental setups with optical accessories mounted directly to a vacuum cube. The adapter rail geometry allows the mounted optical breadboard surface to be coincident with the interior optical breadboard of the vacuum cube plate. Leading to a seamless integration between your optical subassembly and vacuum cube setup. Each size of adapter rail is compatible with various sizes of optical breadboards and can be mounted on any side of a vacuum cube plate. They have 1/4"-20 thru holes for mounting a 1" standard optical table breadboard pattern to a 6x6 vacuum cube plate.

These vacuum compatible aluminum optical breadboards are the perfect low-cost solution when building optical subassemblies that require a vacuum environment. They are 1/4"-20 tapped on a 1" standard optical table breadboard pattern (the first row of holes are 0.5 inches from the edge). They have five counterbored holes, one on each corner inset 1" from the edge and one in the center, which are used with 1/4" socket head cap screws to provide a smooth top surface when mounting the breadboard to a table or adding pedestals as feet. The flatness is specified as 0.006" over 1 ft These breadboards can be used inside a vacuum chamber system due to the lack of an anodized coating, down to 10

These vacuum compatible aluminum optical breadboards are the perfect low-cost solution when building optical subassemblies that require a vacuum environment. They are 1/4"-20 tapped on a 1" standard optical table breadboard pattern (the first row of holes are 0.5 inches from the edge). They have five counterbored holes, one on each corner inset 1" from the edge and one in the center, which are used with 1/4" socket head cap screws to provide a smooth top surface when mounting the breadboard to a table or adding pedestals as feet. The flatness is specified as 0.006" over 1 ft These breadboards can be used inside a vacuum chamber system due to the lack of an anodized coating, down to 10