Skip to main content
× Home Products Downloads About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
cart
 
Login Icon
login

Keyword       Ideal Spectroscopy Part Number       Manufacturer Part Number

× Light Modular-Vacuum-Chambers Feedthroughs Vacuum-Pumps Gauges-And-Controllers-Pressure-Measurement Vacuum-Valves Gas-Delivery Light Analysis Fittings-and-Flanges Optical-Table-Accessories Glass-Vessels-And-Hardware Glass-Vacuum-Gas-Cells Mirror-Mounts Optics Pulse-Valves-For-Jet-Cooling

Extended Length Knob, Compatible with all IVP Manual Butterfly Valves
In Stock: 58


This is an extended length knob for Ideal Vacuum Products manual butterfly valves. The extended length knob allows for easier access to our manual butterfly valves, making adjustments effortless. These manual butterfly valves provide a low-cost alternative to bellows sealed gate valves. These valves manually turn from the fully-closed position to fully open with only a quarter turn of the knob. A patented design allows the sealing disk to center itself when closing, with even pressure around the copper knife edge O-ring. This design also helps to lower the amount of scuffing or rolling of the O-ring. Quarter-turn actuation, small footprint and the shortest possible gas path make manual butterfly valves the preferred choice for many applications.

Condition: New



Product Number: P109942



Price: $25.97



Kalrez Rebuild Kit for CF 3.375 and KF 50 Butterfly Valves (For CommmandValves or Manual Valves)
Out of Stock
Arrival: 1 on 2021-10-27


This kit may be used to either replace the existing Kalrez seals within your CF 3.375/KF 50 Ideal Vacuum Products CommandValve or Manual Butterfly Valve or expand the capabalities of your Viton-fitted valve by replacing its O-rings with these Kalrez O-rings. Included within are Kalrez seals, set screw, and vented valve fastening screws. Kalrez is a perfluoroelastomer that offers greater chemical resistance than Viton and should be used where exposure to harsh chemicals like acids, bases, amines, steam, ethylene oxide, and other aggressive chemicals are likely to quickly erode Viton. Additionally, Kalrez offers a continuous upper service temperature of 275C (525 F). This is approximately 100F higher than other products claiming broad chemical resistance. This high temperature stability translates to increased chemical resistance over many temperature ranges, especially if high temperature process excursions occur. Despite this excellent combination of chemical and thermal resistance, these seals and valves should not be used in process evacuations containing highly toxic or poisonous gases.

Condition: New



Product Number: P108975



Price: $356.21



Viton Rebuild Kit for CF 2.75 and KF 40 Butterfly Valves (For CommmandValves or Manual Valves)
In Stock: 9


This maintenance kit contains easy-to-replace viton seals for your CF 2.75/KF40 Ideal Vacuum Products Command Valve or Manual Butterfly Valve. Viton seals are generally rugged, however, heavy mechanical and chemical exposure may cause wear over time. Our easy-to-service valve design makes replacement of these seals fast and simple. Included within are Viton seals, set screw, and vented valve fastening screws. Compared to most other elastomers, Viton is better able to withstand high temperature, while simultaneously retaining its good mechanical properties. Oil and chemical resistance are also essentially unaffected by elevated temperatures. Compounds of Viton remain substantially elastic indefinitely when exposed to laboratory air oven aging up to 204C (399F) or to intermittent exposures up to 316C (601F). Viton low temperature performance is dependent on type, with serviceability as low as -31C (-24 F) in dynamic seals and -45C (-49F) in static seals using Viton GLT-S. Viton is characterized by its:

Condition: New



Product Number: P108972



Price: $39.25



Kalrez Rebuild Kit for CF 2.125 and KF 25 Butterfly Valves (For CommmandValves or Manual Valves)
Out of Stock
Arrival: 1 on 2021-10-27


This kit may be used to either replace the existing Kalrez seals within your CF 2.125/KF 25 Ideal Vacuum Products CommandValve or Manual Butterfly Valve or expand the capabalities of your Viton-fitted valve by replacing its O-rings with these Kalrez O-rings. Included within are Kalrez seals, set screw, and vented valve fastening screws. Kalrez is a perfluoroelastomer that offers greater chemical resistance than Viton and should be used where exposure to harsh chemicals like acids, bases, amines, steam, ethylene oxide, and other aggressive chemicals are likely to quickly erode Viton. Additionally, Kalrez offers a continuous upper service temperature of 275C (525 F). This is approximately 100F higher than other products claiming broad chemical resistance. This high temperature stability translates to increased chemical resistance over many temperature ranges, especially if high temperature process excursions occur. Despite this excellent combination of chemical and thermal resistance, these seals and valves should not be used in process evacuations containing highly toxic or poisonous gases.

Condition: New



Product Number: P108971



Price: $307.91



Viton Rebuild Kit for CF 2.125 and KF 25 Butterfly Valves (For CommmandValves or Manual Valves)
In Stock: 1


This maintenance kit contains easy-to-replace viton seals for your CF 2.125/KF25 Ideal Vacuum Products CommandValve or Manual Butterfly Valve. Viton seals are generally rugged, however, heavy mechanical and chemical exposure may cause wear over time. Our easy-to-service valve design makes replacement of these seals fast and simple. Included within are Viton seals, set screw, and vented valve fastening screws. Compared to most other elastomers, Viton is better able to withstand high temperature, while simultaneously retaining its good mechanical properties. Oil and chemical resistance are also essentially unaffected by elevated temperatures. Compounds of Viton remain substantially elastic indefinitely when exposed to laboratory air oven aging up to 204C (399F) or to intermittent exposures up to 316C (601F). Viton low temperature performance is dependent on type, with serviceability as low as -31C (-24 F) in dynamic seals and -45C (-49F) in static seals using Viton GLT-S. Viton is characterized by its:

Condition: New



Product Number: P108970



Price: $39.25



Viton Rebuild Kit for CF 3.375 and KF 50 Butterfly Valves (For CommmandValves or Manual Valves)
In Stock: 6


This maintenance kit contains easy-to-replace viton seals for your CF 3.375/KF50 Ideal Vacuum Products CommandValve or Manual Butterfly Valve. Viton seals are generally rugged, however, heavy mechanical and chemical exposure may cause wear over time. Our easy-to-service valve design makes replacement of these seals fast and simple. Included within are Viton seals, set screw, and vented valve fastening screws. Compared to most other elastomers, Viton is better able to withstand high temperature, while simultaneously retaining its good mechanical properties. Oil and chemical resistance are also essentially unaffected by elevated temperatures. Compounds of Viton remain substantially elastic indefinitely when exposed to laboratory air oven aging up to 204C (399F) or to intermittent exposures up to 316C (601F). Viton low temperature performance is dependent on type, with serviceability as low as -31C (-24 F) in dynamic seals and -45C (-49F) in static seals using Viton GLT-S. Viton is characterized by its:

Condition: New



Product Number: P108974



Price: $39.25



Kalrez Rebuild Kit for CF 1.33 and KF 16 Butterfly Valves (For CommmandValves or Manual Valves)
Out of Stock
Arrival: 2 on 2021-10-27


This kit may be used to either replace the existing Kalrez seals within your CF 1.33/KF16 Ideal Vacuum Products CommandValve or Manual Butterfly Valve or expand the capabalities of your Viton-fitted valve by replacing its O-rings with these Kalrez O-rings. Included within are Kalrez seals, set screw, and vented valve fastening screws. Kalrez is a perfluoroelastomer that offers greater chemical resistance than Viton and should be used where exposure to harsh chemicals like acids, bases, amines, steam, ethylene oxide, and other aggressive chemicals are likely to quickly erode Viton. Additionally, Kalrez offers a continuous upper service temperature of 275C (525 F). This is approximately 100F higher than other products claiming broad chemical resistance. This high temperature stability translates to increased chemical resistance over many temperature ranges, especially if high temperature process excursions occur. Despite this excellent combination of chemical and thermal resistance, these seals and valves should not be used in process evacuations containing highly toxic or poisonous gases.

Condition: New



Product Number: P108969



Price: $271.69



Kalrez Rebuild Kit for CF 2.75 and KF 40 Butterfly Valves (For CommmandValves or Manual Valves)
Out of Stock
Arrival: 1 on 2021-10-27


This kit may be used to either replace the existing Kalrez seals within your CF 2.75/KF 40 Ideal Vacuum Products Command Valve or Manual Butterfly Valve or expand the capabalities of your Viton-fitted valve by replacing its O-rings with these Kalrez O-rings. Included within are Kalrez seals, set screw, and vented valve fastening screws. Kalrez is a perfluoroelastomer that offers greater chemical resistance than Viton and should be used where exposure to harsh chemicals like acids, bases, amines, steam, ethylene oxide, and other aggressive chemicals are likely to quickly erode Viton. Additionally, Kalrez offers a continuous upper service temperature of 275C (525 F). This is approximately 100F higher than other products claiming broad chemical resistance. This high temperature stability translates to increased chemical resistance over many temperature ranges, especially if high temperature process excursions occur. Despite this excellent combination of chemical and thermal resistance, these seals and valves should not be used in process evacuations containing highly toxic or poisonous gases.

Condition: New



Product Number: P108973



Price: $332.06



Viton Rebuild Kit for CF 1.33 and KF 16 Butterfly Valves (For CommmandValves or Manual Valves)
In Stock: 4


This maintenance kit contains easy-to-replace viton seals for your CF 1.33/KF16 Ideal Vacuum Products CommandValve or Manual Butterfly Valve. Viton seals are generally rugged, however, heavy mechanical and chemical exposure may cause wear over time. Our easy-to-service valve design makes replacement of these seals fast and simple. Included within are Viton seals, set screw, and vented valve fastening screws. Compared to most other elastomers, Viton is better able to withstand high temperature, while simultaneously retaining its good mechanical properties. Oil and chemical resistance are also essentially unaffected by elevated temperatures. Compounds of Viton remain substantially elastic indefinitely when exposed to laboratory air oven aging up to 204C (399F) or to intermittent exposures up to 316C (601F). Viton low temperature performance is dependent on type, with serviceability as low as 31C (24 F) in dynamic seals and 45C (49F) in static seals using Viton GLT-S. Viton is characterized by its:

Condition: New



Product Number: P108968



Price: $45.29



Ideal Vacuum Logo Water Mark
CONTACT US
Ideal Spectroscopy
5910 Midway Park Blvd NE,
Albuquerque, NM 87109-5805

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealspectroscopy.com