This Swagelok® FM type, flexible, convoluted hose is 12" long and has 1/4" OD tube adapter ends for connection to Swagelok tubing compression-type fittings. The 1/4" tubing adapter uses an outward facing nut and ferrule set which then connects to a threaded male swagelok fitting. A 1/4" nut and ferrule set is required and must be purchased separately. These FM type hoses feature a working pressure from vacuum to 3100 psig at temperatures from -200°C to 37°C ( -325°F to 100°F) and feature 316L stainless steel annular convoluted inner cores and braided exteriors. The single braid layer of 316L stainless steel promotes hose pressure containment and exhibits strong performance in dynamic cycling applications. End connections are welded to ASME Boiler and pressure Vessel Code Section IX.

This Swagelok® FM type, flexible, convoluted hose is 24" long and has 1/4" OD tube adapter ends for connection to Swagelok tubing compression-type fittings. The 1/4" tubing adapter uses an outward facing nut and ferrule set which then connects to a threaded male swagelok fitting. A 1/4" nut and ferrule set is required and must be purchased separately. These FM type hoses feature a working pressure from vacuum to 3100 psig at temperatures from -200°C to 37°C ( -325°F to 100°F) and feature 316L stainless steel annular convoluted inner cores and braided exteriors. The single braid layer of 316L stainless steel promotes hose pressure containment and exhibits strong performance in dynamic cycling applications. End connections are welded to ASME Boiler and pressure Vessel Code Section IX.

This Swagelok® T series, flexible, convoluted hose is 24" long and has 1/4" Swagelok male tubing fittings that accept 1/4" OD tubing. A 1/4" nut and ferrule set is preinstalled on either end of the hose. Nut threads are silver plated to prevent galling and seizing of the fitting when tightened. These 1/4" T series hoses feature a working pressure from vacuum to 3000 psig at temperatures from -53°C to 93°C ( -65°F to 200°F) and feature a smooth-bore PTFE core and 316L stainless steel braided exterior. The single braid layer of 316L stainless steel promotes hose pressure containment and protects the core from abrasion. These PTFE-cored hoses are commonly used where chemical compatibility and permeation resistance is required and the PTFE material complies with FDA regulation 21CFR.

This Swagelok® FM type, flexible, convoluted hose is 36" long and has 1/4" OD tube adapter ends for connection to Swagelok tubing compression-type fittings. The 1/4" tubing adapter uses an outward facing nut and ferrule set which then connects to a threaded male swagelok fitting. A 1/4" nut and ferrule set is required and must be purchased separately. These FM type hoses feature a working pressure from vacuum to 3100 psig at temperatures from -200°C to 37°C ( -325°F to 100°F) and feature 316L stainless steel annular convoluted inner cores and braided exteriors. The single braid layer of 316L stainless steel promotes hose pressure containment and exhibits strong performance in dynamic cycling applications. End connections are welded to ASME Boiler and pressure Vessel Code Section IX.

This Swagelok® T series, flexible, convoluted hose is 36" long and has 1/4" Swagelok male tubing fittings that accept 1/4" OD tubing. A 1/4" nut and ferrule set is preinstalled on either end of the hose. Nut threads are silver plated to prevent galling and seizing of the fitting when tightened. These 1/4" T series hoses feature a working pressure from vacuum to 3000 psig at temperatures from -53°C to 93°C ( -65°F to 200°F) and feature a smooth-bore PTFE core and 316L stainless steel braided exterior. The single braid layer of 316L stainless steel promotes hose pressure containment and protects the core from abrasion. These PTFE-cored hoses are commonly used where chemical compatibility and permeation resistance is required and the PTFE material complies with FDA regulation 21CFR.

This Swagelok® FM type, flexible, convoluted hose is 48" long and has 1/4" OD tube adapter ends for connection to Swagelok tubing compression-type fittings. The 1/4" tubing adapter uses an outward facing nut and ferrule set which then connects to a threaded male swagelok fitting. A 1/4" nut and ferrule set is required and must be purchased separately. These FM type hoses feature a working pressure from vacuum to 3100 psig at temperatures from -200°C to 37°C ( -325°F to 100°F) and feature 316L stainless steel annular convoluted inner cores and braided exteriors. The single braid layer of 316L stainless steel promotes hose pressure containment and exhibits strong performance in dynamic cycling applications. End connections are welded to ASME Boiler and pressure Vessel Code Section IX.

This Swagelok® FM type, flexible, convoluted hose is 48" long and has 1/4" OD tube adapter ends for connection to Swagelok tubing compression-type fittings. The 1/4" tubing adapter uses an outward facing nut and ferrule set which then connects to a threaded male swagelok fitting. A 1/4" nut and ferrule set is required and must be purchased separately. . These 1/4" T series hoses feature a working pressure from vacuum to 3000 psig at temperatures from -53°C to 93°C ( -65°F to 200°F) and feature a smooth-bore PTFE core and 316L stainless steel braided exterior. The single braid layer of 316L stainless steel promotes hose pressure containment and protects the core from abrasion.